LET OP! Wij zijn tussen donderdag 30 mei 12:00u en maandag 17 juni gesloten.
U kunt gewoon bestellen maar uw bestelling wordt echter pas vanaf maandag 17 juni verwerkt.
U kunt gewoon bestellen maar uw bestelling wordt echter pas vanaf maandag 17 juni verwerkt.
Arduino UNO R4 WiFi Pinouts
Op deze pagina vindt je de pinouts voor de Arduino UNO R4 WiFi.
Analoge pins:
Pin | Function | Type | Description |
---|---|---|---|
1 | BOOT | NC | Not connected |
2 | IOREF | IOREF | Reference for digital logic V - connected to 5 V |
3 | Reset | Reset | Reset |
4 | +3V3 Power | +3V3 Power | Rail |
5 | +5V Power | +5V Power | Rail |
6 | GND Power | Power | Ground |
7 | GND Power | Power | Ground |
8 | VIN Power | Power | Voltage Input |
9 | A0 Analog | Analog | Analog input 0 / DAC |
10 | A1 Analog | Analog | Analog input 1 / OPAMP+ |
11 | A2 Analog | Analog | Analog input 2 / OPAMP- |
12 | A3 Analog | Analog | Analog input 3 / OPAMPOut |
13 | A4 Analog | Analog | Analog input 4 / I²C Serial Data (SDA) |
14 | A5 Analog | Analog | Analog input 5 / I²C Serial Clock (SCL) |
Digitale pins:
Pin | Function | Type | Description |
---|---|---|---|
1 | SCL | Digital | I2C Serial Clock (SCL) |
2 | SDA | Digital | I2C Serial Data (SDA) |
3 | AREF | Digital | Analog Reference Voltage |
4 | GND | Power | Ground |
5 | D13/SCK/CANRX0 | Digital | GPIO 13 / SPI Clock / CAN Receiver (RX) |
6 | D12/CIPO | Digital | GPIO 12 / SPI Controller In Peripheral Out |
7 | D11/COPI | Digital | GPIO 11 (PWM) / SPI Controller Out Peripheral In |
8 | D10/CS/CANTX0 | Digital | GPIO 10 (PWM) / SPI Chip Select / CAN Transmitter (TX) |
9 | D9 | Digital | GPIO 9 (PWM~) |
10 | D8 | Digital | GPIO 8 |
11 | D7 | Digital | GPIO 7 |
12 | D6 | Digital | GPIO 6 (PWM~) |
13 | D5 | Digital | GPIO 5 (PWM~) |
14 | D4 | Digital | GPIO 4 |
15 | D3 | Digital | GPIO 3 (PWM~) / Interrupt Pin |
16 | D2 | Digital | GPIO 2 / Interrupt Pin |
17 | D1/TX0 | Digital | GPIO 1 / Serial 0 Transmitter (TX) |
18 | D0/TX0 | Digital | GPIO 0 / Serial 0 Receiver (RX) |
OFF pins:
Pin | Function | Type | Description |
---|---|---|---|
1 | OFF | Power | For controlling power supply |
2 | GND | Power | Ground |
3 | VRTC | Power | Battery connection to power RTC only |
ICSP pins:
Pin | Function | Type | Description |
---|---|---|---|
1 | CIPO | Internal | Controller In Peripheral Out |
2 | +5V | Internal | Power Supply of 5 V |
3 | SCK | Internal | Serial Clock |
4 | COPI | Internal | Controller Out Peripheral In |
5 | RESET | Internal | Reset |
6 | GND | Internal | Ground |