Arduino Starter Kit MEGA R3

Arduino Starter Kit MEGA R3

Product information:

Large Arduino MEGA starter kit with everything you need for a good start with the Arduino.

Contents:
- 1x Arduino MEGA (compatible) with USB cable
- 1x MQ-2 Gas sensor
- 1x HC-SR04 Ultrasonic Distance Sensor
- 1x Stepper motor 28BYJ-48 with ULN2003 driver board
- 1x ADXL345 Three Axis Acceleration Module
- 1x LED Matrix 8x8 round LEDs red common cathode
- 1x Display LCD HD44780 - 16x2 white on blue
- 1x 7-segment display 4 digits
- 1x 7-segment display 1 digit
- 1x Potentiometer 10kOhm linear
- 2x Tilt sensor
- 1x Buzzer 5 Volt 12mm active
- 1x Buzzer passive
- 1x Servo motor analogue TowerPro Micro Servo 9g SG90
- 1x Breadboard 830 pins MB102 - universal experiment board white
- 1x Dupont jumper cable 10-wire
- 1x Soil moisture sensor
- 1x Headerpins 40x
- 1x Infrared remote control with 21 keys
- 1x PIR motion sensor
- 1x DHT11 temperature/humidity sensor
- 1x Joystick breakout board DR811
- 1x Battery holder 6xAA with power plug 2.1mm x 5.5mm
- 4x micro switch push button with cap
- 1x Real Time Clock DS3231 RTC - Time clock breakout board/module
- 1x Breadboard jumper cables male/male 65x
- 1x Relay board 1-channel 5V
- 1x Flame sensor
- 1x RGB LED with built-in resistors (for 5V)
- 1x LM35 temperature sensor
- 1x Infrared receiver for remote control
- 3x Light sensor LDR light sensitive sensor
- 1x RFID Set RFID-RC522 13.56MHz with RFID tags and RFID reader
- 15x LEDs in blue, yellow and red
- 8x Resistor 220Ohm
- 8x Resistor 10kOhm
- 8x Resistor 1kOhm
- 1x Resistor value card
- 1x Storage box
- 1x CDROM with documentation

This starter kit does not include instructions on how to use all of the components, but most of them can be found online.