USB cables, hubs & connectors
USB cables, USB hubs, connectors, and everything you need to connect USB devices to your circuit, Arduino, or Raspberry Pi.
-
Power cable MicroUSB to female jack 5.5x2.1
Power cable for connecting a power supply with a 5.5 x 2.1 jack plug to a MicroUSB connection such as that of a Raspberry Pi.
In stock -
USB Adapter board
With this board you can connect all different types of USB connectors to each other.
It has USB-A male and female connections, a USB-C connection and a MicroUSB connection.
You can also solder header pins on it to connect your own cabling. In stock -
USB Chassis Part with Cable USB A Female to 5 Pin
CableUSB Connection Cable USB A Female to 5 female IDE header pins with chassis mounting.
For example, use this to create an external USB connection in the housing of your project.
Cable length: ~50cm In stock -
USB Connection Cable USB A <-> USB B 1.2 meters (e.g. for Arduinos and prin
Use this cable to connect your Arduino UNO or printer to your computer.
Connectors: Type B male Type A male
Length: 1.1m
Color: black -
USB Connection Cable USB A <-> USB B 1.8 meters (e.g. for Arduinos and prin
Use this cable to connect your Arduino UNO or printer to your computer.
Connectors: Type B male Type A male
Length: 1.8m
Color: beige In stock -
USB Connection Cable USB A <-> USB B micro 1.0 meter
You use this cable to connect devices with a micro USB connection to a computer, such as the Arduino Leonardo or a Raspberry Pi.
Length: 1.0m
Color: black In stock -
USB Connection Cable USB A <-> USB B micro 3.0 meters
You use this cable to connect devices with a micro USB connection to a computer, such as the Arduino Leonardo or a Raspberry Pi.
In stock
-
USB Connection Cable USB A <-> USB B mini 1.8 meters
You use this cable to connect devices with a mini USB connection to a computer, such as the Arduino Nano.
Connectors: Type B mini male Type A male In stock -
USB Connection Cable USB A <-> USB C 0.3 meters
You use this cable to connect devices with a USB-C connection, such as a Raspberry Pi 4/5 or ESP32, to a computer.
Length: ~0.3m
Technical specifications:
Type: charging/data cable
Connections: USB-A to USB-C
In stock -
USB Connection Cable USB A <-> USB C 0.5 meter white
You use this cable to connect devices with a USB-C connection, such as a Raspberry Pi or ESP32, to a computer.
Length: 0.5m
Color: white
Technical specifications:
Type: Charging/Data Cable
Connections: USB-A to USB-C
Supported: QC up to 18W (9V/2A)
Bandwidth: up to 480 Mbit/s
Standard: 2.0 Compatible: with all USB-A interfaces (including Hi-Speed... In stock -
USB Connection Cable USB A <-> USB C 1 meter with switch black
From now on, no more pulling the cable out of your Raspberry to turn it off! This cable has a switch with which you can quickly and easily turn your Raspberry on and off.
With USB-C connection.
Length: 1m
Color : black
Of course also suitable for switching on/off other devices with a USB-C connection!
In stock -
USB Connection Cable USB A <-> USB C 1.0 meter white
You use this cable to connect devices with a USB-C connection, such as a Raspberry Pi or ESP32, to a computer.
Length: 1.0m
Color: white
Technical specifications:
Type: Charging/Data Cable
Connections: USB-A to USB-C
Supported: QC up to 18W (9V/2A)
Bandwidth: up to 480 Mbit/s
Standard: 2.0 Compatible: with all USB-A interfaces (including Hi-Speed... In stock -
USB Connection Cable USB A <-> USB C 3.0 - 2 meters
You use this cable to connect devices with a USB-C connection to a computer, such as a telephone or Raspberry Pi 4.
Connectors: Type C 3.1 Type A male 3.0 In stock -
USB Connection Cable USB A <-> USB C 3.0 meter black
You use this cable to connect devices with a USB-C connection, such as a Raspberry Pi or ESP32, to a computer.
Length: 3.0m
Color: black
Technical specifications:
Type: charging/data cable
Connections: USB-A to USB-C
Supported: QC3
Bandwidth: up to 480 Mbit/s
Standard: 2.0 Compatible: with all USB-A interfaces (including Hi-Speed ​​​​USB ... In stock -
USB Connection Cable USB A <-> USB Micro 0.3 meters
This cable is used to connect devices with a micro USB connection to a computer, such as the Arduino Leonardo, Arduino Due, or a Raspberry Pi.
Connectors: Type A male Type Micro male
Length: 0.3m
Color: blue -
USB Connection Cable USB C to USB A 15cm OTG (USB 3.1)
This USB adapter cable enables you to connect devices with a USB-A connector (e.g. USB sticks, a mobile phone or external hard drive) to a PC, laptop or smartphone equipped with a USB type C port.
The cable supports a charging current of up to 3A. In stock -
USB Connection Cable USB C to USB C 1.0m (USB 3.1)
USB cable with a USB 3.1 type C connection on both sides.
This cable is used for power supply and data transfer between devices in the USB 3.1 standard, which - compared to its predecessor USB 2.0 - has a much higher maximum data rate of up to 5Gb/s.
This USB cable allows you to connect electronic devices equipped with modern universal USB type C... In stock -
USB Connection Cable USB C to USB C 1.5m (USB 3.2)
USB cable with a USB 3.2 type C connection on both sides.
This cable is used for power supply and data transfer between devices in the USB 3.2 standard, which - compared to its predecessor USB 2.0 - has a much higher maximum data rate of up to 5Gb/s.
This USB cable allows you to connect electronic devices equipped with modern universal USB type C... In stock -
USB Connection Cable USB C to USB C 2m (USB 3.1)
USB cable with a USB 3.1 type C connection on both ends.
This cable is used for power and data transfer between devices in the USB 3.1 standard, which - compared to its predecessor USB 2.0 - has a much higher maximum data rate of up to 5Gb/s.
This USB cable allows you to connect electronic devices equipped with modern universal USB type C connect... In stock -
USB Extension Cable USB-A male-female 5 meters
With this cable you can extend any USB cable. Handy if you have to dive behind your computer every time to connect something!
Plug in this cable and place the end on your workstation so you can easily connect all your USB devices.
Connectors: Type A male Type A female In stock -
USB Host Shield 2.0 for Arduino
With this USB host shield you can connect USB devices to your Arduino. For example, you can connect a USB stick, an external USB hard drive or a USB Bluetooth stick.
With a bluetooth stick you can then pair with a Wiimote for example. For this, see the bluetooth examples in the library.
Under documentation you will find the library you need to use... -
USB Plug Type-A female micro-USB to DIP adapter board
This adapter allows you to convert a female micro USB Type-A connector to a 2.54mm DIP format with 5 pins. Ideal for prototyping or integrating USB connectivity into custom circuits and breadboards.
Number of connections: 5
Grid: 2.54mm
In stock -
USB Plug Type-A female to DIP adapter board
This adapter allows you to convert a USB Type-A female connector to a 2.54mm DIP format with 4 pins. Ideal for use in prototyping or integrating USB connectivity into custom circuits and breadboards.
Number of connections: 4
Grid: 2.54mm
PCB dimensions: 17mm x 17mm In stock -
USB Plug Type-A male to DIP adapter board
This adapter allows you to convert a male USB Type-A connector to a 2.54mm DIP format with 4 pins. Ideal for use in prototyping or integrating USB connectivity into custom circuits and breadboards.
Number of connections: 4
Grid: 2.54mm
PCB dimensions: 15.5mm x 15.5mm In stock -
USB Power Cable MicroUSB 10cm eg. Raspberry Pi
Open power cable to MicroUSB connector.
- Cable length: 10cm In stock -
USB Power Cable USB to 5.5x2.1 jack plug (12VDC output)
With this cable you can get 12V from your USB connection to connect it to a circuit.
Voltage: 12VDC
Length: ~80cm
Plugs: USB-A -> 5.5x2.1 jack plug In stock -
USB Power Cable USB to 5.5x2.1 jack plug (5VDC output)
With this cable you get the 5V from your USB connection to connect it to a circuit. Arduino or other microcontroller.
Voltage: 5VDC
Length: ~80cm
Plugs: USB-A -> 5.5x2.1 jack plug In stock -
USB Power Cable USB to 5.5x2.1 jack plug (9VDC output)
With this cable you can get 9V from your USB connection to connect it to a circuit.
Voltage: 9VDC
Length: ~80cm
Plugs: USB-A -> 5.5x2.1 jack plug In stock -
USB Power Cable USB-C 1m eg. Raspberry Pi
Open power cable to USB-C port.
- Cable length: 1m In stock -
USB Power Cable with On/Off Switch 0.3m
Only the + and - are in the cable. The data signals are not passed through. This cable is therefore only to switch the power to a USB device.
Length: +/-28cm
Attention! Not suitable for data communication. For power supply only. -
USB Power Cable with On/Off Switch USB A - B Micro
From now on, no more pulling the cable out of your Raspberry to turn it off! This cable has a switch with which you can quickly and easily turn your Raspberry on and off.
With micro USB connection.
Length: ~1m
Color : black
Of course also suitable for switching on/off other devices with a micro-USB connection!
Attention! Not suitable for data co... In stock -
USB connection cable OTG USB B micro
USB OTG (On-the-go) to micro USB adapter cable.
For example, connecting keyboards, mice, external hard drives and USB sticks to compatible smartphones and tablets.
For example for Sony (Xperia link) and Samsung smartphones.
In stock
Shipping costs Netherlands
>
