Connectors & Plugs
Check out our range of connectors and plugs for all your electronics projects. For connecting power supplies, stepper motors, video signals, data signals, and more.
See also: Headers, header pins & Sockets-
Adapter cable XT60 male - HXT 4mm 12AWG
Handy extension cable from XT60 male to HXT 4mm.
Cable thickness: 12AWG
Total length: +/-10.0cm
In stock -
BNC Plug with male terminal block
BNC male plug with terminal block/screw connection for easy connection of wires without soldering.
In stock
-
BNC plug with terminal block female
BNC female plug with terminal block/screw connection for easy connection of wires without soldering.
In stock
-
Banana plug 4mm black
Black banana plug with screw connection, making it easy to attach the wire.
In stock
-
Banana plug 4mm red
Red banana plug with screw connection, making it easy to attach the wire.
In stock
-
Banana plug set 8-piece 4mm
Nickel-plated 8-piece banana plug set in 4 colours. With screw for connecting a cable (up to 4mm thick).
Set of 8 pieces: 2x red, 2x black, 2x green, 2x yellow.
Maximum voltage: 50V
Maximum current: 4A In stock -
Banana plug stackable 4mm green
Green banana plug for connecting measuring instruments, audio systems, and speakers. These plugs can be stacked, meaning they can be connected together.
In stock
-
Banana plug stackable black
Black banana plug for connecting measuring instruments, audio systems and speakers. These plugs can be 'stacked', i.e. plugged into each other.
In stock
-
Banana plug stackable blue
Blue banana plug for connecting measuring instruments, audio systems and speakers. These plugs can be 'stacked', i.e. plugged into each other.
In stock
-
Banana plug stackable red
Red banana plug for connecting measuring instruments, audio systems and speakers. These plugs can be 'stacked', i.e. plugged into each other.
In stock
-
Banana plug stackable yellow
Yellow banana plug for connecting measuring instruments, audio systems and speakers. These plugs can be 'stacked', i.e. plugged into each other.
In stock
-
Battery connector 9V block battery
Hard plastic connector for 9V block (6LR61/6LF22) batteries with cable (15cm).
In stock
-
Boot for RJ45 UTP network plugs
In stock
-
Box header JST PH 6-pin male connector 2mm
In stock
-
Cable JST 2-pins
Length: +/-20cm
Adafruit Part number: 261
In stock
-
Cable for stepper motor JST - Dupont 100cm
Cable for connecting a stepper motor. With a 6-pin JST PH connector on 1 side and a 4-pin Dupont connector on the other side (4 wires are connected).
Length: 100cm In stock -
Cable for stepper motor JST PH - JST PH 100cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 100cm In stock -
Cable for stepper motor JST PH - JST PH 150cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 150cm In stock -
Cable for stepper motor JST PH - JST PH 50cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 50cm In stock -
Cable for stepper motor JST PH - JST PH 80cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 80cm In stock -
Cable for stepper motor JST PH - open 80cm
Cable for connecting stepper motors of 3D printers.
4 Connected wires in a 6-pin plug.
Contrary to the image, the white vein can also be black.
Length: 80cm In stock -
Cable lug insulation sleeve 2.8mm
Transparent sleeve for 2.8mm wide cable lugs.
In stock
-
Cable lug insulation sleeve 4.8mm
Transparent sleeve for 4.8mm wide cable lugs.
In stock
-
Cable lug insulation sleeve 6.3mm
Transparent sleeve for 6.3mm wide cable lugs.
In stock
-
Cable lug uninsulated female slide 2.8mm x 0.8mm
Cable lug without insulation for cable thicknesses 1.50 - 2.50 mm²
Dimensions: width 2.8mm, thickness 0.8mm. In stock -
Cable lug uninsulated female slide 4.8mm x 0.8mm
Cable lug without insulation for cable thicknesses 1.50 - 2.50 mm²
Dimensions: width 4.8mm, thickness 0.8mm. In stock -
Cable lug uninsulated female slide 6.3mm x 0.8mm
Cable lug without insulation for cable thicknesses 1.50 - 2.50 mm²
Dimensions: width 6.3mm, thickness 0.8mm. In stock -
Cable set JST SM 2 pins - Adafruit 2880
These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type receptacle connector. They are good for whenever you have 2 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps t...
Adafruit Part number: 2880
-
Cable set JST SM 2 pins - black/red 30cm
Set of two cables with 2-pole JST SM connectors (male + female). The length of the cables is 30cm. So total about 60cm.
Suitable for easily connecting power to a circuit.
Length: 2x ~30cm
Wire thickness: 24AWG In stock -
Cable set JST SM 3 pins - Adafruit 1663
Male and female connector for connecting 3 pin RGB LEDs and strips.
Length: 15cm.
Can be supplied with black or coloured wires. Adafruit Part number: 1663 In stock -
Cable set JST SM 3 pins - black/red/yellow - 30cm
Set of two cables with 3-pole JST SM connectors (male + female). The length of the cables is 30cm. So total about 60cm.
Suitable for easily connecting power and data lines to a circuit.
Length: 3x ~30cm
Wire thickness: 24AWG In stock -
Cable set JST SM 4 pins - Adafruit 578
Male and female connector for connecting 4 pin RGB LEDs and strips.
Length: 15cm.
Can be supplied with black or coloured wires. Adafruit Part number: 578 In stock -
Cable set JST SM micro 1.25mm - 2 pins
Set of 2 cables with a male and female JST SM micro 1.25mm 2-pin connector. Total length of the cables incl. connectors +/- 16cm.
In stock -
Chassis part 2.1x5.5mm power plug jack plug breadboard friendly
Power plug jack plug for mounting on a printed circuit board. Also suitable for (temporary) mounting on a breadboard by the correct position of the pins.
Adafruit Part number: 373
In stock
-
Cinch chassis part black
The tulip/RCA chassis connector (black) is a panel-mount connector for transmitting audio and video signals. This chassis connector is often used in amplifiers, audio equipment, measuring devices, and DIY projects.
The black color is typically used for the left audio channel or a video signal. Thanks to its secure mounting, this connector is ideal... In stock -
Cinch chassis part red
The tulip/RCA chassis connector (red) is a panel-mount connector for transmitting audio and video signals. This chassis connector is often used in amplifiers, audio equipment, measuring devices, and DIY projects.
The red color is typically used for the right audio channel or a video signal. Thanks to its secure mounting, this connector is ideal fo... In stock -
Cinch plug male white
The RCA male connector (white) is used for connecting audio and video signals to devices such as amplifiers, televisions, mixers, and media players. This connector is used on cables and fits into standard RCA jacks.
In stock -
Cinch plug female with terminal connector
Cinch plug female with terminal block/screw connection for easy connection of wires without soldering.
In stock
-
Cinch plug male black
The RCA male connector (black) is used for connecting audio and video signals to devices such as amplifiers, televisions, mixers, and media players. This connector is used on cables and fits into standard RCA jacks.
The black color is often used for the left audio channel or as a general signal connector. In stock -
Cinch plug male blue
The RCA male connector (blue) is used for connecting audio and video signals to devices such as amplifiers, televisions, mixers, and media players. This connector is used on cables and fits into standard RCA jacks.
In stock -
Cinch plug male red
The RCA male connector (red) is used for connecting audio and video signals to devices such as amplifiers, televisions, mixers, and media players. This connector is used on cables and fits into standard RCA jacks.
The red color is often used for the right audio channel or as a general signal connector. In stock -
Cinch plug male with terminal connector
Cinch plug male with terminal block/screw connection for easy connection of wires without soldering.
In stock
-
Cinch plug male yellow
The RCA male connector (yellow) is used for connecting audio and video signals to devices such as amplifiers, televisions, mixers, and media players. This connector is used on cables and fits into standard RCA jacks.
The yellow color is often used for the video signal or as a general signal connector. In stock -
Connector JST PH 6 pins
Connector for connecting 2 JST PH 6 pin connectors.
For example, for extending stepper motor cables.
Type: B6B-PH-TW-S (LF)(SN In stock -
Connector JST PH contact female (5 pieces)
Female connector/contact for a female JST PH plug.
The contacts can be clicked into the plug quite easily.
Use crimping pliers to securely attach the wire to the connector.
- Suitable for cable: 30AWG to 24 AWG (cross-section 0.05 - 0.22mm2).
- Maximum load: 2A
- Maximum voltage: 100V
Supplied per 5 pieces. In stock -
Connector JST SM 2 pin female
Female JST SM plug with 2 pins.
For example for signal/data cables and LED strips.
- Pin spacing/grid: 2.5mm
- Supplied without contacts (see additional articles).
In stock -
Connector JST SM 2 pins male
Male JST SM plug with 2 pins.
For example for signal/data cables and LED strips.
- Pin spacing/grid: 2.5mm
- Supplied without contacts (see additional articles).
In stock -
Connector JST SM 3 pin female
Female JST SM plug with 3 pins.
For example for signal/data cables and LED strips.
- Pin spacing/grid: 2.5mm
- Supplied without contacts (see additional articles).
In stock -
Connector JST SM 3 pins male
Male JST SM plug with 2 pins.
For example for signal/data cables and LED strips.
- Pin spacing/grid: 2.5mm
- Supplied without contacts (see additional articles).
In stock -
Connector JST SM 4 pin female
Female JST SM plug with 4 pins.
For example for signal/data cables and LED strips.
- Pin spacing/grid: 2.5mm
- Supplied without contacts (see additional articles).
In stock -
Connector JST SM 4 pins male
Male JST SM plug with 2 pins.
For example for signal/data cables and LED strips.
- Pin spacing/grid: 2.5mm
- Supplied without contacts (see additional articles).
In stock -
Connector JST SM contact female (5 pieces)
Female connector/contact for a female JST SM plug.
The contacts can be clicked into the plug quite easily.
Use a crimping tool to securely attach the wire to the connector.
- Suitable for cable: 28AWG to 22 AWG (cross-section 0.08 - 0.33mm2).
- Maximum load: 3A
Supplied per 5 pieces. -
Connector JST SM contact male (5 pieces)
Male connector/contact for a male JST SM plug.
The contacts can be clicked into the plug quite easily.
Use a crimping tool to securely attach the wire to the connector.
- Suitable for cable: 28AWG to 22 AWG (cross-section 0.08 - 0.33mm2).
- Maximum load: 3A
Supplied per 5 pieces. In stock -
Connector MIDI DIN 5-pin chassis part female
5-pin female DIN chassis part for connecting MIDI equipment, among other things. To be soldered onto a printed circuit board yourself.
In stock
-
Connector MIDI DIN 5-pin female plug
5-pin female DIN connector for connecting MIDI equipment, among other things. Self-solderable.
In stock
-
Crimp terminal assortment 150PCS
The 150-piece set consists of 70 ring terminals, 25 butt connectors, 27 fork terminals, 14 flat plugs and 14 flat plug sleeves so that you always have the necessary part on hand. The material of the terminals is of industrial quality, has a high conductivity and is insulated. The set is supplied in a handy case for quick and easy identification.
F... In stock -
D-Sub Plug DB9 9pins Housing Black
Housing for male or female DB9 9-pin connectors.
Supplied with screws and cable clamp.
Color: black In stock -
D-Sub Plug DB9 9pins RS232 connector male
DB9 D-sub connector for serial data connection, among other things.
Male with solder contacts.
Number of pins: 9
Supplied colour: blue
In stock -
D-Sub plug DB25 25pins connector male
Manufacturer: MH CONNECTORS
Connector Type: D-Sub
Number of pins: 25
Connector: plug
Kind of connector: male
Connector variant: turned contacts
Electrical mounting: soldering
Mechanical mounting: for cable
Contact plating: gold-plated In stock -
D-Sub plug DB9 9pins RS232 connector female
DB9 D-sub connector for serial data connection, among other things.
Female with solder contacts.
Number of pins: 9
Supplied colour: black or white
In stock -
Dupont connector female 10 pieces
Loose female Dupont connector for making your own cable with Dupont header connection or for repairing Dupont cables.
10 pcs housing + 10 pcs contact. -
Dupont connector kit 520 pieces
520-piece kit for making Dupont connectors yourself.
With male and female connectors, straight and angled header pins and 1.5m cable.
Pitch: 2.54mm
Connectors:
1X1P 40 pcs
1X2P 30 pcs
1X3P 20 pieces
1X4P 20 pcs
1X5P 20 pieces
1X6P 15 pcs
1X8P 15 pcs
1X10P 15 pieces
2X3P 5 pieces
2X4P 5 pieces
2X5P 5 pieces
2X6P 5 pieces
2X7P 5 pieces
2X8P 5 piec... In stock -
Euro plug flat 230V / 10A white - PAWBOL
Among other things, for replacing the plug of, for example, a table lamp or for supplying power to a circuit.
In stock -
Euro plug flat 230V / 2.5A white
For example, for replacing the plug of a table lamp.
Please note! Images may vary. In stock -
IDC Socket ribbon cable connector 2.54mm 2x20 pins
This 40-pin IDC connector from NELTRON is a reliable solution for quickly and securely connecting ribbon cables in a variety of electronic applications. Its 2x20-pin configuration with a 2.54mm pitch makes it compatible with standard headers, such as those found on Raspberry Pis, development boards, or industrial controllers.
Thanks to its selecti... In stock -
Jack connector/socket 3.5 mm female 4-pin TRRS
In stock
-
Jack connector/socket 3.5 mm female mono
For eg mono headphones. For mounting on a printed circuit board.
In stock
-
Jack connector/socket 3.5 mm female stereo with on/off function
For eg stereo headphones. For mounting on a printed circuit board.
-
Jack plug male 3,5mm stereo gold plated
-
Jack plug male 3,5mm stereo with terminal block
In stock
-
Jack plug male 3.5mm 4-pole TRRS
In stock
-
Jack plug male 3.5mm stereo
In stock
-
Jumper 2,54mm
For quick and easy connection of 2 pins on a 2.54mm grid.
In stock
-
Jumper cable female/female 2 pins 70cm
Jumper cable for use with 3D printers/repraps.
Pins: 2
Pin spacing/grid: 2.54mm
Length: 70cm
Cable colours: black/red In stock -
Jumper cable female/female 3 pins 20cm (servo cable)
Pins: 3
Pin spacing/grid: 2.54mm
Length: 20cm In stock -
Jumper cable female/female 3 pins 70cm
Jumper cable for use with 3D printers/repraps.
Pins: 3
Pin spacing/grid: 2.54mm
Length: 70cm
Cable colors: black/red/green -
Jumper cable female/female 4 pins 20cm
Pins: 4
Pin spacing/grid: 2.54mm
Length: 20cm In stock -
Jumper cable female/female 4 pins 70cm
Jumper cable for use with 3D printers/repraps.
Pins: 4
Pin spacing/grid: 2.54mm
Length: 70cm
Cable colors: black/red/blue/green
Attention! This article can also be supplied with 1x4 and 4x1 (4x1 single) connectors at the ends, instead of 1x4 and 1x4 as in the picture. In stock -
Jumper cable female/female 6 pins 20cm
Pins: 6
Pin spacing/grid: 2.54mm
Length: 20cm In stock -
Jumper cable female/female 8 pins 20cm
Pins: 8
Pin spacing/grid: 2.54mm
Length: 20cm In stock -
Jumper cable male/female 4 pins 70cm
Jumper cable for use with 3D printers/repraps.
Pins: 4
Pin spacing/grid: 2.54mm
Length: 70cm
Cable colors: black/red/blue/green
In stock -
Laboratory connector / aansluitklem banana plug black - Velleman
Black chassis part for connecting banana plugs. Ideal for audio applications, speakers and measuring instruments.
In stock
-
Laboratory connector / connection terminal banana plug red - Velleman
Red chassis part for connecting banana plugs. Ideal for audio applications, speakers and measuring instruments. In stock
-
Laboratory connector banana plug black
Black chassis part for connecting banana plugs. Ideal for audio applications, speakers and measuring instruments.
In stock
-
Laboratory connector banana plug red
Red chassis part for connecting banana plugs. Ideal for audio applications, speakers and measuring instruments.
In stock
-
Loudspeaker Chassis / Terminal square 56x56mm
Loudspeaker connection chassis part square 56x56mm black with black and red clamp connection.
Suitable for wires up to â‹„3.5mm
Dimensions: 56mm x 56mm x31mm
Terminals: 4.2mm In stock -
Plug C13 female 230V AC / 10A for mounting on wire
The C14 female plug (230V/10A) is a power plug for connecting devices to a standard IEC-C13 power cord, such as computers, power supplies, monitors, and measuring equipment. This plug is mounted directly onto a cable and is suitable for DIY and repair applications.
Thanks to its robust construction and reliable contact points, this connector ensur... In stock -
Plug C14 male 230V AC / 10A for mounting on wire
The C14 male plug (230V/10A) is a power plug for connecting devices to a standard IEC-C13 power cord, such as computers, power supplies, monitors, and measuring equipment. This plug is mounted directly onto a cable and is suitable for DIY and repair applications.
Thanks to its robust construction and reliable contact points, this connector ensures... In stock -
Pluggable terminal 2-pin female - Dinkle 5ESDV
In stock
-
Pluggable terminal 2-pin male - Dinkle 5EHDRC
In stock
-
Pluggable terminal 4-pin female - Dinkle 5ESDV
In stock
-
Pluggable terminal 4-pin male - Dinkle 5EHDRC
In stock
-
Power Plug Jack Plug Male DC 2.1x5.5mm with Cable
The power plug that fits perfectly into your Arduino!
Can also be used for other purposes such as video cameras.
Dimensions: 2.1 x 5.5mm.
When used for Arduino, the inside is the positive. It is recommended to use a power supply of 9 to 12 volts DC with a power of 0.5 - 1 A.
Cable length: ~30cm In stock -
Power T-connector Deans 65A 2pins red
Set of male and female deans connectors/plugs, for connecting RC power sources.
This is Pololu article number 925. In stock -
Power connector XT60 female with 12AWG cable
Cable with silicone sleeve and a core thickness of 12AWG with a XT60 female connector. Among other things for connecting power to RC projects.
Cable length: ~10cm
Connection: XT60 female
Wire gauge: 12AWG
Sleeve: silicone
In stock -
Power connector XT60 male with 12AWG cable
Cable with silicone sleeve and a core thickness of 12AWG with a XT60 male connector. Among other things for connecting power to RC projects.
Cable length: ~10cm
Connection: XT60 male
Wire gauge: 12AWG
Sleeve: silicone
In stock -
Power connector XT60 male+female with 14AWG cable
2 Cables with silicone sleeve and a core thickness of 12AWG with a XT60 female and a male connector. Among other things for connecting power to RC projects.
Cable length: ~10cm
Connection: XT60 female and male
Wire gauge: 12AWG
Sleeve: silicone In stock -
Power connectors Deans male+female with 16AWG cable
Set of 2 cables with deans male and female connector of 10cm.
-
Power connectors MR30 male+female 15A 3pins
This MR30 connector set consists of a male and female plug and is ideal for compact, high-current connections in RC applications, drones, batteries and other electronics.
Features:
- Nominal current: 15A
- Peak current: up to 30A
- Voltage: suitable for DC applications
- Insulation material: high-quality heat-resistant PA
- Temperature range: -20�... In stock -
Power connectors XT60 male+female 65A 2pins yellow
For example, for connecting RC power sources.
In stock
-
Power cord 230V 1,5m black
Power cord/Power cable with earthed plug.
Connection: open end
Length: 1.5 meters
Wire: 2 cores, 0.75mm2
Color: black -
Power cord 230V with Euro plug - C7/C8 2m black
Power cord/power cable for 230V with flat Euro plug on one end and a C7/C8 connection on the other end.
Connection: C7/C8
Length: 2 meters
Wire: 2 cores
Color: black
Max. 2.5A / 250V In stock -
Power jack plug Female DC 2,1x5,5mm with block terminal connection
Female jack plug.
With terminal block connection so no soldering required!
Dimensions: 2.1 x 5.5mm.
When used for the Arduino, the inside is the plus. In stock -
Power jack plug Male DC 2,1x5,5mm with block terminal connection
The power plug that fits perfectly into your Arduino!
Can also be used for other purposes such as video cameras.
With terminal block connection so no soldering required!
Dimensions: 2.1 x 5.5mm.
When used for Arduino, the inside is the positive. It is recommended to use a power supply of 9 to 12 volts DC with a power of 0.5 - 1 A. In stock -
Power plug Jack Plug Male DC 2.5x5.5mm
Male power plug with an inner diameter of 2.5mm and an outer diameter of 5.5.
To solder a wire yourself.
Dimensions: 2.5 x 5.5mm.
Plug length: 9mm In stock -
Power plug Jack Plug Male DC 2.5x5.5mm Long (14mm)
Male power plug with an inner diameter of 2.5mm and an outer diameter of 5.5.
To solder a wire yourself.
Dimensions: 2.5 x 5.5mm.
Plug length: 14mm In stock -
Power plug Jack plug Female DC 2,1x5,5mm with cable
Cable with 2.1 x 5.5mm female jack plug for connecting power to a circuit.
Up to a maximum of 2A.
Dimensions: 2.1 x 5.5mm. In stock -
Power plug Jack plug Male DC 2,1x5,5mm
The power plug that fits your Arduino perfectly!
Can also be used for other purposes such as video cameras.
To solder a wire yourself.
Dimensions: 2.1 x 5.5mm.
Plug length: 9mm
When using the Arduino, the inside is positive. A power supply of 9 to 12 volts DC with a current rating of 0.5 - 1 A is recommended. In stock -
RJ11 Connector 6P4C - Modular telephone plug
RJ11 connector suitable for connecting telephones. This RJ11 connector has 6 poles of which the middle 4 can be connected.
In stock
-
RJ45 Connector 8P8C Cat 5e unshielded - Modular network plug
RJ45 connector suitable for making your own UTP network cables. This RJ45 connector, also known as a network plug, has 8 poles.
In stock
-
SMA RF antenna connector female
Connector for connecting RF antennas with an SMA plug.
In stock
-
SMA RF antenna connector male
Connector for connecting RF antennas with an SMA plug.
In stock
-
Screw terminal blocks 2-fold straight
These screw terminal blocks are useful for attaching thicker cables that don't fit in your breadboard to your circuit.
Of course, you can also solder these screw terminals onto your PCB.
With 2 connections.
Distance between pins: 5mm
Suitable for wire sizes: 22AWG to 14AWG In stock -
Screw terminal blocks 3-fold straight
These screw terminal blocks are useful for attaching thicker cables that don't fit in your breadboard to your circuit.
Of course, you can also solder these screw terminals onto your PCB.
With 3 connections.
Distance between pins: 5mm
Suitable for wire sizes: 22AWG to 14AWG In stock -
Screwless terminal KF141R 2-way
Terminal for screwless clamping of wire from 26AWG to
18AWG.
- 2-fold
- type: KF141R (side insertion)
- pitch (distance between pins): 2.54mm
- strip the wire to 11mm In stock -
Screwless terminal KF141R 3-way
Terminal for screwless clamping of wire from 26AWG to
18AWG.
- 3-fold
- type: KF141R (side insertion)
- pitch (distance between pins): 2.54mm
- strip the wire to 11mm In stock -
Screwless terminal KF141R 4-way
Terminal for screwless clamping of wire from 26AWG to
18AWG.
- 4-fold
- type: KF141R (side insertion)
- pitch (distance between pins): 2.54mm
- strip the wire to 11mm In stock -
Signal connector 4-pole JST XH 2.54mm with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 4
Wire thickness: 24AWG
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector 6-pole JST SH micro with wire and socket 15cm
Connector: JST SH micro for SMD mounting.
Pin spacing: 1mm
Poland: 6
Wire thickness: 28AWG
Please note that the colours of the wiring may differ. Always check the correct connection. -
Signal connector 7-pole JST XH 2.54mm with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 7
Wire thickness: 24AWG
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector Aviation GX16 3 pin male/female
This GX16D circular connector set consists of a male and female connector (3 pins) and is ideal for creating reliable, detachable connections in electronic applications. Thanks to its robust metal housing and practical push-pull locking system, this connector provides a firm and secure connection.
The connector is made of zinc alloy with a nickel ... In stock -
Signal connector Aviation GX16 6 pin male/female
This GX16D circular connector set consists of a male and female connector (6 pins) and is ideal for creating reliable, detachable connections in electronic applications. Thanks to its robust metal housing and practical push-pull locking system, this connector provides a firm and secure connection.
The connector is made of zinc alloy with a nickel ... In stock -
Signal connector Aviation GX16 8 pin male/female
This GX16D circular connector set consists of a male and female connector (8 pins) and is ideal for creating reliable, detachable connections in electronic applications. Thanks to its robust metal housing and practical push-pull locking system, this connector provides a firm and secure connection.
The connector is made of zinc alloy with a nickel ... In stock -
Signal connector Aviation GX16 10 pin male/female
This GX16D circular connector set consists of a male and female connector (10 pins) and is ideal for creating reliable, detachable connections in electronic applications. Thanks to its robust metal housing and practical push-pull locking system, this connector provides a firm and secure connection.
The connector is made of zinc alloy with a nickel... In stock -
Signal connector JST XH 2.54mm 2-pole with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 3
Wire thickness: 24AWG
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector JST XH 2.54mm 3-pole with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 3
Wire thickness: 24AWG
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector JST XH 2.54mm 6-pin with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 6
Wire thickness: 24AWG
(7-pin version shown).
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector JST XH 2.54mm 9-pin with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 9
Wire thickness: 24AWG
(7-pin version shown).
Please note that the colours of the wiring may differ. Always check the correct connection. -
Signal connector Molex 2-pin with wire
Wire length: +/-30cm
Distance between pins: 2.54mm In stock -
Signal connector Molex 3-pin with wire
Wire length: +/-30cm
Distance between pins: 2.54mm In stock -
Signal connector Molex 4-pin with wire
Wire length: +/-30cm
Distance between pins: 2.54mm In stock -
Signal connector Molex 6-pin with wire
Wire length: +/-30cm
Distance between pins: 2.54mm In stock -
Socket C14 male snap-in
Chassis part for installation in a housing or panel. For connecting a C14 230V plug (see supplementary articles).
In stock
-
Speaker Chassis / Terminal round 65mm
Loudspeaker connection chassis part round 65mm black with black and red clamp connection.
Suitable for wires up to â‹„3.5mm
Dimensions: â‹„65mm x 31mm
Terminals: 4.5mm In stock -
Terminal block with quick connector 2-fold
Up to 250V / 10A.
For wire from 0.5 to 3.5mm2.
With the quick connectors you can easily press the cable into the terminal block and you don't have to screw anything!
Version: 2-fold In stock -
Terminal block with quick connector 3-fold
Up to 250V / 10A.
For wire from 0.5 to 3.5mm2.
With the quick connectors you can easily press the cable into the terminal block and you don't have to screw anything!
Version: 3-fold In stock -
Terminal blocks 12-fold 2,5mm2 / 3A / 380V
Sturdy plastic terminal blocks for connecting electrical wires up to 2.5mm2, making them suitable for connecting lamps in the home, for example.
A strip of 12 crown stones next to each other. Easy to cut apart.
In stock -
USB Chassis part USB-A Female AF90-type1
In stock
-
USB Chassis part USB-A Female AF90-type2
In stock
-
USB Chassis part USB-A Female AF90-type3
In stock
-
USB Chassis part USB-A Female AF90-type4
In stock
-
USB Connector USB Type-C
Self-soldered USB Type C connector. With connections for 5V, GND and 2 data lines.
The housing must be glued with superglue or hot glue. In stock -
USB Plug Type-A female to DIP adapter board
This adapter allows you to convert a USB Type-A female connector to a 2.54mm DIP format with 4 pins. Ideal for use in prototyping or integrating USB connectivity into custom circuits and breadboards.
Number of connections: 4
Grid: 2.54mm
PCB dimensions: 17mm x 17mm In stock -
USB Plug Type-A male to DIP adapter board
This adapter allows you to convert a male USB Type-A connector to a 2.54mm DIP format with 4 pins. Ideal for use in prototyping or integrating USB connectivity into custom circuits and breadboards.
Number of connections: 4
Grid: 2.54mm
PCB dimensions: 15.5mm x 15.5mm In stock -
Wire clamp WAGO 221 2-way
Clamp to quickly connect 2 wires together (welding clamp).
Suitable for wire from 0.2 to 4mm2 (24-12AWG).
Max. 450V/32A In stock -
Wire clamp WAGO 221 3-way
Clamp to quickly connect 3 wires together (welding clamp).
Suitable for wire from 0.2 to 4mm2 (24-12AWG).
Max. 450V/32A In stock -
Wire clamp WAGO 221 5-way
Clamp to quickly connect 5 wires together (welding clamp).
Suitable for wire from 0.2 to 4mm2 (24-12AWG).
Max. 450V/32A In stock -
Wire clamp WAGO 222 2-way
Clamp to quickly connect 2 wires together (welding clamp).
Suitable for wire from 0.08 to 2.5mm2 (28-12AWG).
Max. 400V/32A In stock -
Wire clamp WAGO 222 3-way
Clamp to quickly connect 3 wires together (welding clamp).
Suitable for wire from 0.08 to 2.5mm2 (28-12AWG).
Max. 400V/32A -
Wire clamp WAGO 222 5-way
Clamp to quickly connect 5 wires together (welding clamp).
Suitable for wire from 0.08 to 2.5mm2 (28-12AWG).
Max. 400V/32A In stock -
uFL SMT antenna connector
uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great! Chances are your antenna doesn't use uFL as the main connector, in which case you should check out our uFL to SMA and uFL to RP-SMA adapter ca...
Adafruit Part number: 1661
Shipping costs Netherlands
>
