Mouse repair
Are the buttons of your mouse worn out, or have the feet worn down from heavy use? Repair them! Throwing it away is a waste.
Repairing a mouse is often not very difficult. With the microswitch buttons and replacement Teflon feet from Bits & Parts, your mouse will be as good as new again!
Also for repairing your Logitech or Apple mouse!
See also: Tools, Soldering & Accessories-
Keycap puller for keyboard repair
Stainless steel keycap puller for neatly removing keys from (desktop) keyboards. Handy for replacing defective keys or if you want to thoroughly clean the individual keys and the underlying printed circuit board.
You simply slide the 2 steel loops under the key and then pull it straight out. In stock -
Microswitch push button (make contact) 6x6x1mm
Make contact micro switch push button.
Width: 6mm
Length: 6mm
Button height: 1mm (from top of housing)
Total height: 4.3mm
Switching torque: 1.6N In stock -
Microswitch push button (make contact) mouse 6x6x7.3mm Kailh
Make contact micro switch push button. This switch is often used in mice as the click contact of the mouse wheel and side buttons.
Width: 6mm
Length: 6mm
Button height: 1mm (from top of housing)
Total height: 7.3mm In stock -
Microswitch push button (make contact) mouse E-Switch TS20100F070S
E-Switch TS20100F070S microswitch switch.
For self-repair of mouse buttons of, among others, a Logitech MX Anywhere mouse.
Dimensions: 8.6mm x 6.8mm x 3.5mm (10.9mm incl. pins).
See also the PDFs.
Single pole switch (SPDT).
Adafruit Part number: 612-TS20100F070S In stock -
Microswitch push button (make contact) mouse Kailh 6x6x4.3mm
Normally open microswitch pushbutton. This switch is often used in mice as the click contact for the mouse wheel and side buttons.
Width: 6.2mm
Length: 6.2mm
Button height: 1mm (from top of housing)
Total height: 4.3mm In stock -
Microswitch push button (make contact) mouse Kailh 6x6x9.5mm
Normally open microswitch pushbutton. This switch is often used in mice as the click contact for the mouse wheel and side buttons.
Width: 6.2mm
Length: 6.2mm
Button height: 3mm (from top of housing)
Total height: 9.5mm In stock -
Microswitch push button (make contact) mouse Omron D2FC-F-7N
Omron D2FC-F-7N microswitch switch.
Including for self-repair of mouse buttons.
Dimensions: 12.7 x 5.8 x 6.6mm (10.2mm incl. pins).
Single pole switch (SPDT).
In stock -
Microswitch push button (make contact) mouse Omron D2LS-21
Omron D2LS-21 microswitch switch.
For self-repair of mouse buttons of, among others, a Logitech MX Anywhere mouse.
Dimensions: 8.6mm x 4.8mm x 3.5mm (11.2mm wide incl. pins).
See also the datasheet PDF.
Single pole switch (SPST-NO).
Adafruit Part number: 653-D2LS-21 -
Mouse glides teflon 7mm x 0.8mm (set of 2)
Round mouse glide feet to replace worn or loose ones.
For example for the following Logitech mice: G1/MX300/M100/M235/M210/M180
Dimensions: ⌀7mm x 0.8mm
In stock -
Mouse glides teflon sheet 70x100mm
Sheet of Teflon for cutting mouse glides to size yourself.
With self-adhesive back (clean the surface thoroughly with alcohol first).
Dimensions: 70m x 100mm
Thickness: ~0.6mm
-
Mouse wheel rotary encoder Kailh "Red core" 10mm
Has your mouse racked up too many miles and the scroll wheel given up the ghost? With this new rotary mouse wheel encoder, your mouse will be as good as new!
This is the 10mm version, measured from the center of the wheel axle to the base (see images). This is also indicated on the housing.
Voltage: 10V DC, 1mA
Torque: 20 - 40gf In stock -
Mouse wheel rotary encoder Kailh "Red core" 11mm
Has your mouse racked up too many miles and the scroll wheel given up the ghost? With this new rotary mouse wheel encoder, your mouse will be as good as new!
This is the 11mm version, measured from the center of the wheel axle to the base (see images). This is also indicated on the housing.
Voltage: 10V DC, 1mA
Torque: 20 - 40gf In stock -
Mouse wheel rotary encoder Kailh "Red core" 5mm
Has your mouse racked up too many miles and the scroll wheel given up the ghost? With this new rotary mouse wheel encoder, your mouse will be as good as new!
This is the 5mm version, measured from the center of the wheel axle to the base (see images). This is also indicated on the housing.
Voltage: 10V DC, 1mA
Torque: 20 - 40gf In stock -
Mouse wheel rotary encoder Kailh "Red core" 7mm
Has your mouse racked up too many miles and the scroll wheel given up the ghost? With this new rotary mouse wheel encoder, your mouse will be as good as new!
This is the 7mm version, measured from the center of the wheel axle to the base (see images). This is also indicated on the housing.
Voltage: 10V DC, 1mA
Torque: 20 - 40gf In stock -
Mouse wheel rotary encoder Kailh "Red core" 8mm
Has your mouse racked up too many miles and the scroll wheel given up the ghost? With this new rotary mouse wheel encoder, your mouse will be as good as new!
This is the 8mm version, measured from the center of the wheel axle to the base (see images). This is also indicated on the housing.
Voltage: 10V DC, 1mA
Torque: 20 - 40gf In stock -
Mouse wheel rotary encoder Kailh "Red core" 9mm
Has your mouse racked up too many miles and the scroll wheel given up the ghost? With this new rotary mouse wheel encoder, your mouse will be as good as new!
This is the 9mm version, measured from the center of the wheel axle to the base (see images). This is also indicated on the housing.
Voltage: 10V DC, 1mA
Torque: 20 - 40gf In stock
Shipping costs Netherlands
>
