Raspberry Pi Fan kit
Product information:
Fan suitable for Raspberry Pi 4B, 3B+ and 3B.
This fan can be controlled by software so that it only switches on or off automatically when a certain temperature is reached.
The switch can also be programmed to use as an on/off switch or to toggle between temperature controlled and manual mode.
Specifications:
• Operating voltage: 5 V DC
• Fan speed: 4,200 rpm
• Air flow: 0.05 m³ / min
• Noise level: 18.6 dB
• Programmable RGB LED
• Programmable button
• Compatible with Raspberry Pi 4B, 3B+, 3B
• Fan dimensions: 30 x 30 x 7 mm
• Overall dimensions: 42 x 45 x 13 mm
Please note: no soldering required, just press!
Assembly is very simple and takes less than two minutes.
With the component side of the PCB facing up, push the two M2.5 bolts through the holes from below, then tighten the first pair of nuts to secure them and act as spacers.
Push the fan mounting holes down onto the bolts, with the cable side of the fan facing down (as shown) and the text on the fan facing up. Secure with two more nuts.
Then push the PCB onto the header pins of the Raspberry as far down as it will go.
See the link below for programming options.
Click to view the product's website.
>
Shipping costs Netherlands