Smart Cars, Robotics & RC
See also:
Motors, Servo's & Drivers
-
Adapter cable XT60 male - HXT 4mm 12AWG
Handy extension cable from XT60 male to HXT 4mm.
Cable thickness: 12AWG
Total length: +/-10.0cm
In stock -
Ball caster wheel metal 0,5inch/1,27cm - Pololu 953
Metal ball wheel in ABS holder. Supplied with 2 bolts and spacers in 2 sizes.
Height can be varied from 13.5mm to 17.8mm.
Diameter between the 2 mounting holes: 14.7mm.
In stock -
Ball caster wheel metal 0,5inch/1,27cm N20
With 1 large ball and 4 small balls on which the large ball rolls.
Housing dimensions: 22mm x 16mm x 15mm (incl. ball).
In stock -
Ball caster wheel metal 0,6inch/1,56cm
Metal ball wheel in nylon holder.
Height: 20mm
Distance between mounting holes: 40mm
Diameter holes: 3.1mm
Up to 100g weight. In stock -
Ball caster wheel plastic 0,5inch/1,27cm - Pololu 953
Plastic ball wheel in ABS holder. Supplied with 2 bolts and spacers in 2 sizes.
Height can be varied from 13.5mm to 17.8mm.
Diameter between the 2 mounting holes: 14.7mm.
In stock -
Ball caster wheel plastic 1inch/2,54cm - Pololu 956
Plastic ball wheel in ABS holder. Supplied with 3 bolts and 2 spacers.
Height can be varied from 27.9mm to 33.0mm.
Diameter between the 3 mounting holes: 17.5mm.
In stock -
Banana plug brass gold plated 4mm female 36A
For wire up to 12AWG.
In stock
-
Banana plug brass gold plated 4mm male 32A
For wire up to 12AWG.
In stock
-
Caster wheel / swivel wheel for robot smart cars / cars nylon
Ball bearing caster for making a robot, car or other vehicle.
Wheel type: white nylon
Maximum weight: 10kg
Total height: 33mm
Wheel diameter: 24.7mm
Wheel width: 14mm
Mounting plate: 38 x 32mm
Diameter mounting plate holes: +/- 4.75mm
Distance between mounting plate holes: 30 x 23mm In stock -
Motor DC 3-6V Type 130
Simple 3 to 6 Volt DC motor.
Dimensions:
Diameter shaft: 2.0mm
Casing: 15x20x29mm
Total length incl. axle: 38.0mm
Length of shaft outside housing: 9.0mm
In stock -
Motor DC 3-6V Type 130 double shaft
Simple 3 to 6 Volt DC motor.
Dimensions:
Diameter shaft: 2.0mm
Casing: 15x20x29mm
Total length incl. axle: 45.0mm
Length of axle outside housing front: 8.0mm
Length of axis outside housing back: 8.0mm
In stock -
Motor DC 3-6V for smart cars and robots
With a reduction gear for a gear ratio of 1:48.
The axle can be used on both sides.
Operates on 3 to 6 volts DC.
At 3 volts:
In stock -
Motor DC 3-6V for smart cars and robots with double metal shaft
With a reduction gearbox for a gear ratio of 1:48.
The shaft can be used on both sides. There is a metal shaft on both sides (image differs).
Operates on 3 to 6 volts direct current.
At 3 volts:
In stock -
Motor DC 3-6V for smart cars and robots with single metal shaft
With a reduction gearbox for a gear ratio of 1:48.
This motor has a single metal shaft.
Operates on 3 to 6 volts direct current.
At 3 volts:
In stock -
Motor DC 3-7,5V for smart cars and robots with speed encoder
This is the DFRobot Micro DC geared motor with encoder. It is a motor with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 16 pulse single per round giving a maximum output of 1920 within one round.
With an Arduino controller and motor driver, applications for this might include a closed-loop PID control or PWM ... In stock -
Motor DC 6V Type 130 double long shaft
Simple type 130 6V Volt DC motor with extra long shaft on 2 sides.
Dimensions:
Diameter shaft: 2.0mm
Casing: 15x20x29mm
Total length incl. axle: 55.0mm
Length of axle outside housing front: 8.0mm
Length of axle outside housing back: 17.0mm
In stock -
Power connector XT60 female with 12AWG cable
Cable with silicone sleeve and a core thickness of 12AWG with a XT60 female connector. Among other things for connecting power to RC projects.
Cable length: ~10cm
Connection: XT60 female
Wire gauge: 12AWG
Sleeve: silicone
In stock -
Power connector XT60 male with 12AWG cable
Cable with silicone sleeve and a core thickness of 12AWG with a XT60 male connector. Among other things for connecting power to RC projects.
Cable length: ~10cm
Connection: XT60 male
Wire gauge: 12AWG
Sleeve: silicone
In stock -
Power connector XT60 male+female with 14AWG cable
2 Cables with silicone sleeve and a core thickness of 12AWG with a XT60 female and a male connector. Among other things for connecting power to RC projects.
Cable length: ~10cm
Connection: XT60 female and male
Wire gauge: 12AWG
Sleeve: silicone In stock -
Power connectors Deans male+female with 16AWG cable
Set of 2 cables with deans male and female connector of 10cm.
-
Power connectors XT60 male+female 65A 2pins yellow
For example, for connecting RC power sources.
In stock
-
Rod/Schaft 2mm x 100mm metal
Metal axle for use in small mechanical installations.
Also suitable for making or repairing small toy or model building movements.
Diameter: 2mm
Length: 100mm In stock -
Rod/Shaft 2mm x 60mm metal
Metal axle for use in small mechanical installations.
Also suitable for making or repairing small toy or model building movements.
Diameter: 2mm
Length: 60mm In stock -
Servo motor tester / ESC controller / tester
With this tester you can easily test servos and ESCs.
3 servos can be tested simultaneously, both manually and automatically.
ESCs (electronic speed controllers) can also be tested. By turning the knob the speed of the motors is controlled.
Maximum output: 15mA
Power supply: 4.5V-6V
Weight: 15g
Dimensions: 42.5x24.0x23.5 mm In stock -
Servo motor tester with display analog/digital
With this tester you can test 4 servo motors simultaneously.
The tester has 3 modes (changeable with the select button).
Mode 1: manual mode (you can adjust the PPM signal yourself with the knob)
Position 2: Neutral (the servo goes to neutral position at PPM 1500).
Position 3: The tester goes from PPM 800 to 2200 and back.
The pulse width knob ha... In stock -
Smart Car Chassis 2WD with 2 motors
Smart car chassis kit 2WD. Nice set to craft a robot car yourself.
The set consists of:
1x car chassis (plexiglass)
2x DC motor with gear ratio of 1:48 (3 to 6 Volt)
2x wheel (66mm)
2x speed encoder
1x universal wheel
1x battery box
1x all necessary mounting materials
In stock -
Smart Car Chassis 2WD with 2 motors around
Smart car chassis kit 2WD. Nice set to craft a robot car yourself.
The set consists of:
1x round car chassis (diameter 14cm)
2x wheel (66mm)
2x DC motor with gear ratio of 1:48 (3 to 6 Volt)
2x engine suspension
1x battery box
2x speed indicator (excl. sensor)
1x screws, nuts and spacers
2x coaster wheel In stock -
Smart Car Chassis 4WD Mecanum Aluminum Double
Smart car chassis kit 4WD with a double aluminum frame and 4 Mecanum wheels. With Mecanum wheels, you can move not only forwards and backwards but also left and right (by rotating the motors in opposite directions). A fun set for building your own robot car.
Dimensions: (LxWxH) 250mm x 142mm x 73mm
The set consists of:
1x double car chassis (alu... In stock -
Smart Car Chassis 4WD Mecanum Aluminum Single
Smart car chassis kit 4WD with a single aluminum frame and 4 Mecanum wheels. With Mecanum wheels, you can move not only forwards and backwards but also left and right (by rotating the motors in opposite directions). A fun set for building your own robot car.
Dimensions: (LxW) 250mm x 142mm
The set consists of:
1x single car chassis (aluminum)
4x... In stock -
Smart Car Chassis 4WD large with 4 motors
Smart car chassis kit 4WD. Nice set to craft a robot car yourself.
The set consists of:
1x car chassis (plexiglass)
4x DC motor with gear ratio of 1:48 (3 to 6 Volt)
4x wheel (66mm)
4x speed encoder
1x all necessary mounting materials
(battery box not included)
In stock -
Speedometer kit
This Kit helps you monitoring the velocity speed of motors, it uses the sensor HC-020 to sense the rotation of circular grid board, and thus output square waves. So users can calculate the rotation velocity or speed via these outputs frequency.
There are 20 grids on the circular grid board, so each rising/falling edge standing an angle: 360/20= 18 ... In stock -
Speedometer wheel
The wheel has 20 holes, so every rise/fall means it has rotated 360/20 = 18 degrees.
To measure the speed you still need a sensor that can see if a hole is passing by. In stock -
Wheel for 2mm axle 18mm yellow
Diameter: 18mm
Width: 9mm
Axle: 2mm In stock -
Wheel for 2mm axle 30mm red
Diameter: 30mm
Width: 13mm
Axle: 2mm In stock -
Wheel for 2mm axle 30mm yellow
Diameter: 30mm
Width: 13mm
Axle: 2mm In stock -
Wheel for smart car / robot - 68mm yellow
Wheel with loose tire for smart cars and robots.
Diameter: 68mm
Width: 26mm
Hole: 5.3 x 3.66mm
Weight: 50 grams
This item does not fit in an envelope and will only be shipped in a parcel. In stock -
Wheel smart car rubber 43x19x3mm
Wheel with tire for smart cars and robots.
Fits, among others, the axle of N20 engines.
Diameter: 43mm
Width: 19mm
Hole: D-shaped 3mm
In stock
Shipping costs Netherlands
>
