Heating & Heated bed
These items are all related to heating the filament and the print bed of the 3D printer.
-
Bed adjustment screw for 3D printers
Adjusting screw for adjusting the heated bed of a 3D printer.
Bolt length: 42.8mm
Nut diameter: 13.8mm In stock -
Bed leveling screw set silicone 18mm M3 orange (set of 4)
Set of 4 silicone spacers with adjustment screw (M3) and adjustment knob for leveling a heated print bed. Suitable for Creality 3D printers.
Thread: M3
Inner diameter: 4-8mm
Outer diameter: 16mm
Height: 18mm
Colour: orange
In stock -
Bed leveling screw set silicone 18mm M4 orange (set of 4)
Set of 4 silicone spacers with adjustment screw (M4) and adjustment knob for leveling a heated print bed. Suitable for Creality 3D printers.
Thread: M4
Inner diameter: 4-8mm
Outer diameter: 16mm
Height: 18mm
Colour: orange
-
Bed leveling spacer/distance bush silicone 16mm black (set of 4)
Set of 4 silicone spacers for leveling a heated print bed. Suitable for Creality 3D printers.
Inner diameter: 4-8mm
Outer diameter: 16mm
Height: 16mm
Colour black
-
Bed leveling spacer/distance bush silicone 18mm black (set of 4)
Set of 4 silicone spacers for leveling a heated print bed. Suitable for Creality 3D printers.
Inner diameter: 4-8mm
Outer diameter: 16mm
Height: 18mm
Colour black
-
Bed leveling spacer/distance bushing silicone 16mm orange (set of 4)
Set of 4 silicone spacers for leveling a heated print bed. Suitable for Creality 3D printers.
Inner diameter: 4-8mm
Outer diameter: 16mm
Height: 16mm
Colour: orange
-
Bed leveling spacer/distance bushing silicone 18mm orange (set of 4)
Set of 4 silicone spacers for leveling a heated print bed. Suitable for Creality 3D printers.
Inner diameter: 4-8mm
Outer diameter: 16mm
Height: 18mm
Colour: orange
-
Bed leveling spring for 3D printers 8mm x 5mm
Replacement spring for leveling the heated bed.
Length: 8mm
Diameter: 5mm In stock -
Clip for hot beds bulldog 25mm
Bulldog clip for clamping a glass plate or other surface to the heatbed of the 3D printer. Easily removable for quick change of printing surface.
Width: 25mm
Maximum clamp thickness: 10mm In stock -
Clip for hot beds bulldog 32mm
Bulldog clip for clamping a glass plate or other surface to the heatbed of the 3D printer. Easily removable for quick change of printing surface.
Width: 32mm
Maximum clamp thickness: 15mm In stock -
Clip for hot beds fixed 35mm
Clip for clamping a glass plate or other surface to the heatbed of the 3D printer.
Width: 35mm
Maximum clamp thickness: 6mm In stock -
Clip for hot beds fixed with screw 30mm
Fixed clip for clamping a glass plate or other surface to the heatbed of the 3D printer.
Width: 30mm
Maximum clamp thickness: 13.8mm In stock -
Glass plate for 3D printers - Borosilicate/Boronosilicate 213x200x3mm
Glass plate made of borosilicate glass. Extremely suitable for use on the heatbed in 3D printers.
The glass heats up well, is much less susceptible to damage than other surfaces and helps to level the print bed properly.
Dimensions: 213 x 200 x 3mm
In stock -
Heat bed/hot plate for RepRap 3D Printers MK2B Dual Power PCB
Dimensions: 214x214 mm
Board material: FR4 1.6 -0.15 mm 2 layer, 35μm copper
Power supply: 12V or 24V
Resistance between 1.0 and 1.2 ohms
Supplied without wiring shown. In stock -
Heater cartridge for 3D Printers 12V/40W 6x20mm 1m red
Universal heater cartridge for heating the hot end of a 3D printer.
Diameter: 6mm
Length: 20mm
Voltage: 12V
Power: 40W
Wire length: ~100cm
Color red In stock -
Heater cartridge for 3D Printers 24V/40W 6x20mm 1m red
Universal heater cartridge for heating the hot end of a 3D printer.
Diameter: 6mm
Length: 20mm
Voltage: 24V
Power: 40W
Wire length: ~100cm
Color red In stock -
Leveling wheel Creality print bed
Printbed leveling wheel with bolt, washer and spring for Creality 3D printers.
Suitable for the Creality CR10 and Ender 3, among others.
Spring: 25mm x 9.8mm In stock -
MOSFET Module for 3D printer heat beds 25A
MOSFET board for switching a heat bed of a 3D printer.
Simply connect the bed to the HOT BED pins and the power supply to DC IN.
The heat bed can then be switched on and off using the control-in pin.
Suitable for 12V and 24V systems.
Dimensions: 60mm x 50mm
Maximum current: 25A
In stock -
Thumb nut M3x7
M3x7 Thumb nut for adjusting 3D printer heatbeds.
Thread: M3
Height: 7mm
Diameter: 11mm In stock
Shipping costs Netherlands
>
