JST & Signal cables
-
Cable JST 2-pins
Length: +/-20cm
Adafruit Part number: 261
In stock
-
Cable for stepper motor JST - Dupont 100cm
Cable for connecting a stepper motor. With a 6-pin JST PH connector on 1 side and a 4-pin Dupont connector on the other side (4 wires are connected).
Length: 100cm In stock -
Cable for stepper motor JST PH - JST PH 100cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 100cm In stock -
Cable for stepper motor JST PH - JST PH 150cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 150cm In stock -
Cable for stepper motor JST PH - JST PH 50cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 50cm In stock -
Cable for stepper motor JST PH - JST PH 80cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 80cm In stock -
Cable for stepper motor JST PH - open 80cm
Cable for connecting stepper motors of 3D printers.
4 Connected wires in a 6-pin plug.
Contrary to the image, the white vein can also be black.
Length: 80cm In stock -
Cable set JST SM 2 pins - Adafruit 2880
These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type receptacle connector. They are good for whenever you have 2 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps t...
Adafruit Part number: 2880
-
Cable set JST SM 2 pins - black/red 30cm
Set of two cables with 2-pole JST SM connectors (male + female). The length of the cables is 30cm. So total about 60cm.
Suitable for easily connecting power to a circuit.
Length: 2x ~30cm
Wire thickness: 24AWG In stock -
Cable set JST SM 3 pins - Adafruit 1663
Male and female connector for connecting 3 pin RGB LEDs and strips.
Length: 15cm.
Can be supplied with black or coloured wires. Adafruit Part number: 1663 In stock -
Cable set JST SM 3 pins - black/red/yellow - 30cm
Set of two cables with 3-pole JST SM connectors (male + female). The length of the cables is 30cm. So total about 60cm.
Suitable for easily connecting power and data lines to a circuit.
Length: 3x ~30cm
Wire thickness: 24AWG In stock -
Cable set JST SM 4 pins - Adafruit 578
Male and female connector for connecting 4 pin RGB LEDs and strips.
Length: 15cm.
Can be supplied with black or coloured wires. Adafruit Part number: 578 In stock -
Cable set JST SM micro 1.25mm - 2 pins
Set of 2 cables with a male and female JST SM micro 1.25mm 2-pin connector. Total length of the cables incl. connectors +/- 16cm.
In stock -
Cable set JST XH 2.54mm 2-pole 30cm
Set of 2 cables with a male and female JST XH 2-pin connector. Total length of the cables incl. connectors +/- 30cm.
-
Cable set JST XH 2.54mm 3-pin 30cm
Set of 2 cables with a male and female JST XH 3-pin connector. Total length of the cables incl. connectors +/- 30cm.
In stock -
Connector JST PH 6 pins
Connector for connecting 2 JST PH 6 pin connectors.
For example, for extending stepper motor cables.
Type: B6B-PH-TW-S (LF)(SN In stock -
Signal connector 4-pole JST XH 2.54mm with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 4
Wire thickness: 24AWG
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector 6-pole JST SH micro with wire and socket 15cm
Connector: JST SH micro for SMD mounting.
Pin spacing: 1mm
Poland: 6
Wire thickness: 28AWG
Please note that the colours of the wiring may differ. Always check the correct connection. -
Signal connector 7-pole JST XH 2.54mm with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 7
Wire thickness: 24AWG
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector JST XH 2.54mm 10-pin with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 10
Wire thickness: 24AWG
(7-pin version shown).
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector JST XH 2.54mm 2-pole with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 3
Wire thickness: 24AWG
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector JST XH 2.54mm 3-pole with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 3
Wire thickness: 24AWG
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector JST XH 2.54mm 6-pin with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 6
Wire thickness: 24AWG
(7-pin version shown).
Please note that the colours of the wiring may differ. Always check the correct connection. In stock -
Signal connector JST XH 2.54mm 8-pin with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 8
Wire thickness: 24AWG
(7-pin version shown).
Please note that the colours of the wiring may differ. Always check the correct connection. -
Signal connector JST XH 2.54mm 9-pin with wire and socket 15cm
Pin spacing: 2.5mm
Pins: 9
Wire thickness: 24AWG
(7-pin version shown).
Please note that the colours of the wiring may differ. Always check the correct connection. -
Signal connector Molex 2-pin with wire
Wire length: +/-30cm
Distance between pins: 2.54mm In stock -
Signal connector Molex 3-pin with wire
Wire length: +/-30cm
Distance between pins: 2.54mm In stock -
Signal connector Molex 4-pin with wire
Wire length: +/-30cm
Distance between pins: 2.54mm In stock -
Signal connector Molex 6-pin with wire
Wire length: +/-30cm
Distance between pins: 2.54mm In stock
Shipping costs Netherlands
>
