USB Cables
All types of USB cables for connecting Arduinos, Raspberry Pis, ESP8266s, ESP32s. Of course, our USB cables are also suitable for connecting power banks and mobile phones.
You can also find the right item here for making your own device with a USB connection or USB cable.
See also: USB cables, hubs & connectors-
USB Cable USB female to alligator clips red/black
USB cable with a female USB-A and a pair of alligator clips in red and black.
This allows you to easily supply power to a USB device. In stock -
USB Cable USB male to alligator clips red/black
USB cable with a male USB-A and a pair of alligator clips in red and black.
This allows you to easily remove power from a USB port to use elsewhere. In stock -
USB Chassis Part with Cable USB A Female to 5 Pin
CableUSB Connection Cable USB A Female to 5 female IDE header pins with chassis mounting.
For example, use this to create an external USB connection in the housing of your project.
Cable length: ~50cm In stock -
USB Chassis Part with Cable USB A Female to USB Micro Male
This handy USB extension cable allows you to easily enclose a device with a micro-B port.
The chassis part is a female USB-A connector. On the other side is a male micro-USB connector.
Cable length: ~50cm In stock -
USB Chassis Part with Cable USB B Female to USB Micro Male
This handy USB extension cable makes it easy to enclose a device with a micro-B port. We think this is most useful when putting an Arduino Leonardo or Raspberry Pi in a case.
Length (end to end): ~310mm
Length (between two connectors): ~280mm
Two 12mm M3 mounting screws, ~29mm apart Adafruit Part number: 937 In stock -
USB Chassis part Dual USB-A / USB-C female
USB chassis part with a female USB-A and a female USB Type C connection for installation.
Suitable for power supply only, not for data transfer.
Maximum current: 2A
Cable length (22AWG): ~7cm
-
USB Chassis part Dual USB-A female
USB chassis part with 2 female USB-A connections for installation.
Suitable for power supply only, not for data transfer.
Maximum current: 2A
Cable length (22AWG): ~7cm
In stock -
USB Connection Cable USB A <-> USB B 0.3 meters
Use this cable to connect your Arduino UNO or printer to your computer.
Connectors: Type B male Type A male
Length: ~0.3m
In stock -
USB Connection Cable USB A <-> USB B 1.2 meters (e.g. for Arduinos and prin
Use this cable to connect your Arduino UNO or printer to your computer.
Connectors: Type B male Type A male
Length: 1.1m
Color: black -
USB Connection Cable USB A <-> USB B 1.8 meters (e.g. for Arduinos and prin
Use this cable to connect your Arduino UNO or printer to your computer.
Connectors: Type B male Type A male
Length: 1.8m
Color: beige In stock -
USB Connection Cable USB A <-> USB B micro 1.0 meter
You use this cable to connect devices with a micro USB connection to a computer, such as the Arduino Leonardo or a Raspberry Pi.
Length: 1.0m
Color: black In stock -
USB Connection Cable USB A <-> USB B micro 3.0 meters
You use this cable to connect devices with a micro USB connection to a computer, such as the Arduino Leonardo or a Raspberry Pi.
In stock
-
USB Connection Cable USB A <-> USB B mini 1.8 meters
You use this cable to connect devices with a mini USB connection to a computer, such as the Arduino Nano.
Connectors: Type B mini male Type A male In stock -
USB Connection Cable USB A <-> USB C 0.3 meters
You use this cable to connect devices with a USB-C connection, such as a Raspberry Pi 4/5 or ESP32, to a computer.
Length: ~0.3m
Technical specifications:
Type: charging/data cable
Connections: USB-A to USB-C
In stock -
USB Connection Cable USB A <-> USB C 0.5 meter white
You use this cable to connect devices with a USB-C connection, such as a Raspberry Pi or ESP32, to a computer.
Length: 0.5m
Color: white
Technical specifications:
Type: Charging/Data Cable
Connections: USB-A to USB-C
Supported: QC up to 18W (9V/2A)
Bandwidth: up to 480 Mbit/s
Standard: 2.0 Compatible: with all USB-A interfaces (including Hi-Speed... In stock -
USB Connection Cable USB A <-> USB C 1.0 meter white
You use this cable to connect devices with a USB-C connection, such as a Raspberry Pi or ESP32, to a computer.
Length: 1.0m
Color: white
Technical specifications:
Type: Charging/Data Cable
Connections: USB-A to USB-C
Supported: QC up to 18W (9V/2A)
Bandwidth: up to 480 Mbit/s
Standard: 2.0 Compatible: with all USB-A interfaces (including Hi-Speed... In stock -
USB Connection Cable USB A <-> USB C 3.0 - 2 meters
You use this cable to connect devices with a USB-C connection to a computer, such as a telephone or Raspberry Pi 4.
Connectors: Type C 3.1 Type A male 3.0 In stock -
USB Connection Cable USB A <-> USB C 3.0 meter black
You use this cable to connect devices with a USB-C connection, such as a Raspberry Pi or ESP32, to a computer.
Length: 3.0m
Color: black
Technical specifications:
Type: charging/data cable
Connections: USB-A to USB-C
Supported: QC3
Bandwidth: up to 480 Mbit/s
Standard: 2.0 Compatible: with all USB-A interfaces (including Hi-Speed ​​​​USB ... In stock -
USB Connection Cable USB A <-> USB Micro 0.3 meters
This cable is used to connect devices with a micro USB connection to a computer, such as the Arduino Leonardo, Arduino Due, or a Raspberry Pi.
Connectors: Type A male Type Micro male
Length: 0.3m
Color: blue -
USB Connection Cable USB A <-> USB Mini 0.3 meters
This cable is used to connect devices with a mini USB connection to a computer, such as the Arduino Nano (depending on the version).
Length: ~30cm In stock -
USB Connection Cable USB C to USB A 15cm OTG (USB 3.1)
This USB adapter cable enables you to connect devices with a USB-A connector (e.g. USB sticks, a mobile phone or external hard drive) to a PC, laptop or smartphone equipped with a USB type C port.
The cable supports a charging current of up to 3A. In stock -
USB Connection Cable USB C to USB C 1.0m (USB 3.1)
USB cable with a USB 3.1 type C connection on both sides.
This cable is used for power supply and data transfer between devices in the USB 3.1 standard, which - compared to its predecessor USB 2.0 - has a much higher maximum data rate of up to 5Gb/s.
This USB cable allows you to connect electronic devices equipped with modern universal USB type C... In stock -
USB Connection Cable USB C to USB C 1.5m (USB 3.2)
USB cable with a USB 3.2 type C connection on both sides.
This cable is used for power supply and data transfer between devices in the USB 3.2 standard, which - compared to its predecessor USB 2.0 - has a much higher maximum data rate of up to 5Gb/s.
This USB cable allows you to connect electronic devices equipped with modern universal USB type C... In stock -
USB Connection Cable USB C to USB C 2m (USB 3.1)
USB cable with a USB 3.1 type C connection on both ends.
This cable is used for power and data transfer between devices in the USB 3.1 standard, which - compared to its predecessor USB 2.0 - has a much higher maximum data rate of up to 5Gb/s.
This USB cable allows you to connect electronic devices equipped with modern universal USB type C connect... In stock -
USB Extension Cable USB-A Male-Female 60cm White
This cable extends any USB cable. Handy if you have to dive behind your computer every time you need to connect something!
Plug in this cable and place the end on your workstation so you can easily connect all of your USB devices.
Connectors: Type A male Type A female
Length: 60 cm (5 meters shown)
Color: white
In stock -
USB Extension Cable USB-A male-female 15cm
USB extension cable with USB-A male and female connectors.
USB Type: 2.0
Length: ~15cm
Color: black In stock -
USB Extension Cable USB-A male-female 30cm
USB extension cable with USB-A male and female connectors.
USB Type: 2.0
Length: ~30cm
Color: black In stock -
USB Extension Cable USB-A male-female 5 meters
With this cable you can extend any USB cable. Handy if you have to dive behind your computer every time to connect something!
Plug in this cable and place the end on your workstation so you can easily connect all your USB devices.
Connectors: Type A male Type A female In stock -
USB Power Cable MicroUSB 10cm eg. Raspberry Pi
Open power cable to MicroUSB connector.
- Cable length: 10cm In stock -
USB Power Cable USB to 5.5x2.1 jack plug (12VDC output)
With this cable you can get 12V from your USB connection to connect it to a circuit.
Voltage: 12VDC
Length: ~80cm
Plugs: USB-A -> 5.5x2.1 jack plug In stock -
USB Power Cable USB to 5.5x2.1 jack plug (5VDC output)
With this cable you get the 5V from your USB connection to connect it to a circuit. Arduino or other microcontroller.
Voltage: 5VDC
Length: ~80cm
Plugs: USB-A -> 5.5x2.1 jack plug In stock -
USB Power Cable USB-C 1m eg. Raspberry Pi
Open power cable to USB-C port.
- Cable length: 1m In stock -
USB Power Cable with On/Off Switch 0.3m
Only the + and - are in the cable. The data signals are not passed through. This cable is therefore only to switch the power to a USB device.
Length: +/-28cm
Attention! Not suitable for data communication. For power supply only. -
USB Power Cable with On/Off Switch USB A - B Micro
From now on, no more pulling the cable out of your Raspberry to turn it off! This cable has a switch with which you can quickly and easily turn your Raspberry on and off.
With micro USB connection.
Length: ~1m
Color : black
Of course also suitable for switching on/off other devices with a micro-USB connection!
Attention! Not suitable for data co... In stock -
USB Verlengkabel USB-A male-female 1,5 meter
Met deze kabel verleng je iedere USB-kabel. Handig voor als je elke keer achter je computer moet duiken om iets aan te sluiten!
Sluit deze kabel aan en leg het uiteinde op je werkplek zodat je gemakkelijk al je USB-apparaten kunt aansluiten.
Connectors: Type A male Type A female
Lengte: 1,5 meter (afgebeeld 5 meter) -
USB connection cable OTG USB B micro
USB OTG (On-the-go) to micro USB adapter cable.
For example, connecting keyboards, mice, external hard drives and USB sticks to compatible smartphones and tablets.
For example for Sony (Xperia link) and Samsung smartphones.
In stock
Shipping costs Netherlands
>
