-
Digit display 4-digits 7-segments TM1637 clock blue - 50x19mm
Blue 4-digit clock display with TM1637 driver chip. The segments and numbers can be controlled separately.
Brightness can be adjusted by software.
The colon can be controlled, the individual points cannot.
Total board dimensions: 66x28x12mm.
Display dimensions: 50x19.5x7.8mm
Height of digits: 14mm (0.56inch)
Voltage: 5V
Interface:
GND - ground
5... In stock -
Digit display 4-digits 7-segments TM1637 clock green - 50x19mm
Green 4-digit clock display with TM1637 driver chip. The segments and numbers can be controlled separately.
Brightness can be adjusted by software.
The colon can be controlled, the individual points cannot.
Total board dimensions: 66x28x12mm.
Display dimensions: 50x19.5x7.8mm
Height of digits: 14mm (0.56inch)
Voltage: 5V
Interface:
GND - ground
... In stock -
Digit display 4-digits 7-segments TM1637 clock red - 50x19mm
Red 4-digit clock display with TM1637 driver chip. The segments and numbers can be controlled separately.
Brightness can be adjusted by software.
The colon can be controlled, the individual points cannot.
Total board dimensions: 66x28x12mm.
Display dimensions: 50x19.5x7.8mm
Height of digits: 14mm (0.56inch)
Voltage: 5V
Interface:
GND - ground
5V... In stock -
Digit display 4-digits 7-segments TM1637 clock yellow - 50x19mm
Yellow 4-digit clock display with TM1637 driver chip. The segments and numbers can be controlled separately.
Brightness can be adjusted by software.
The colon can be controlled, the individual points cannot.
Total board dimensions: 66x28x12mm.
Display dimensions: 50x19.5x7.8mm
Height of digits: 14mm (0.56inch)
Voltage: 5V
Interface:
GND - ground... In stock -
Digit display 8-Digit 7-Segments TM1638 8 buttons/LEDs red
Digit display module with 8 pieces of 7 segment digits.
Control by means of the TM1638 IC that can be connected to an Arduino. Individual segments and numbers can be controlled individually.
Please see the website link for more information on connecting and controlling. In stock -
Digit display 8-digit 7-segments MAX7219 red (digital tube)
Display with 8 pieces 7-segment digits with onboard MAX7219 driver.
Supplied with angled and straight header pins.
Supply voltage: 5V
Dimensions: 82x15x12mm In stock -
Digit display LED 7-segments 1.4cm blue - single common cathode
For the connection diagram, see the last picture.
Color: Blue
Dimensions:
Height: 19mm (number 14mm)
Width: 12.6mm
Thickness: 8mm (excl. pins) -
Digit display LED 7-segments 1.4cm red - 2-way common cathode
For the connection diagram, see the last picture.
Color: red
Dimensions:
Height: 19mm (numbers 14mm)
Width: 19mm
Thickness: 8mm (excl. pins)
In stock -
Digit display LED 7-segments 1.4cm red - 3-way common cathode
For the connection diagram, see the last picture.
Color: red
Dimensions:
Height: 19mm (numbers 14mm)
Width: 37.6mm
Thickness: 8mm (excl. pins)
In stock -
Digit display LED 7-segments 1.4cm red - single common cathode
For the connection diagram, see the last picture.
Color: red
Dimensions:
Height: 14mm
Width: 12.6mm
Thickness: 8mm (excl. pins) In stock -
Display 4-Digit 7-segment blue 1,42cm + I2C backpack - Adafruit 881
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but there's a ...
Adafruit Part number: 881
In stock
-
Display 4-Digit 7-segment red 1,42cm + I2C backpack - Adafruit 878
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but there's a ...
Adafruit Part number: 878
-
Display 4-Digit 7-segment red 3,05cm + I2C backpack - Adafruit
Adafruit 1270.
What's better than a single LED? Lots of LEDs! A fun way to make a numeric display is to use a 4-digit 7-segment display. LED matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but ther... Adafruit Part number: 1270 -
Number display 4-digits 7-segments TM1637 clock white - 50x19mm
White 4-digit clock display with TM1637 driver chip. The segments and numbers can be controlled separately.
Brightness can be adjusted by software.
The colon can be controlled, the individual points cannot.
Total board dimensions: 66x28x12mm.
Display dimensions: 50x19.5x7.8mm
Height of digits: 14mm (0.56inch)
Voltage: 5V
Interface:
GND - ground
... In stock
- Ordered before 16h, often sent the same day*
- Small items shipped cheaply
- Secure payment
- Customers rate us with a 9,2
Shipping costs Netherlands
>
