-
LED 5mm Blue
Standard blue 5mm LED, suitable for most projects.
Don't forget to order a matching resistor.
Calculate here how much resistance you need:
http://ledcalc.com/ In stock -
LED 5mm Blue Clear pre-wired for 5V-12V
Blue 5mm LED with clear lens and pre-wired with built-in resistor for use on 5V-12V.
Cable length: ~20cm In stock -
LED 5mm Blue Flat Top
Blue LED with a diameter of 5mm and a flat top.
These LEDs can be mounted flush with a surface, creating a sleek design.
Voltage: 2.3V
Current: 20mA
Brightness: 500~1500 mcd
Grid spacing: 2.54mm
In stock -
LED 5mm Blue Matte pre-wired for 5V-9V
Blue 5mm LED with frosted lens and pre-wired with built-in resistor for use on 5V-9V.
Cable length: ~20cm In stock -
LED 5mm Candle Effect Warm White Rocket
5mm diameter LED with diffuse white 'rocket' lens. Provides warm white flickering 'candle light'.
Works on 2.5V-5V.
See the effect here: https://www.youtube.com/watch?v=Rv9oVyrATBk
The actual color is slightly cooler than in the video.
In stock -
LED 5mm Candle Effect Yellow Clear
5mm diameter LED with bright white lens. Provides yellow flickering 'candle light'.
Works on 2.5V-5V.
See the effect here: https://www.youtube.com/watch?v=uCgu-fQjHMg
In stock -
LED 5mm Candle Effect Yellow Rocket
5mm diameter LED with diffuse white 'rocket' lens. Gives yellow flickering 'candle light'.
Works on 2.5V-5V.
See the effect here: https://www.youtube.com/watch?v=OBqhb3UCF-Q
In stock -
LED 5mm Green Clear pre-wired for 5V-12V
Green 5mm LED with clear lens and pre-wired with built-in resistor for use on 5V-12V.
Cable length: ~20cm In stock -
LED 5mm Green Flat Top
Green LED with a diameter of 5mm and a flat top.
These LEDs can be mounted flush with a surface, creating a sleek design.
Voltage: 2.3V
Current: 20mA
Brightness: 500~1500 mcd
Grid spacing: 2.54mm
In stock -
LED 5mm Green Matte pre-wired for 5V-9V
Green 5mm LED with frosted lens and pre-wired with built-in resistor for use on 5V-9V.
Cable length: ~20cm In stock -
LED 5mm Infrared Super-bright 940nm - Adafruit 388
Infrared LEDs are used for remote controls (they're the little LEDs in the part you point at your TV) and "night vision" cameras, and these little blue guys are high powered!
They have a wavelength of 940nm, which is what almost all devices listen to. They have a beam width of 20 degrees and work great for any kind of remote control application.
T... Adafruit Part number: 388 In stock -
LED 5mm Infrared/IR CQY99 Vishay TSUS5402 950nm
-
LED 5mm Infrared/IR Vishay TSAL7400 940nm
In stock
-
LED 5mm Multi-color/RGB Clear pre-wired for 5V-12V
Multi-color/RGB (slow flash) 5mm LED with clear lens and pre-wired with built-in resistor for use on 5V-12V.
Cable length: ~20cm In stock -
LED 5mm Orange
Orange 5mm LED with orange lens. In stock
-
LED 5mm Orange Clear
Orange 5mm LED with clear lens.
-
LED 5mm Pink Clear
Pink 5mm LED with clear lens.
-
LED 5mm RGB clear common anode
This 5mm RGB LED with a clear lens is perfect for creating vibrant, multi-colored lighting effects in various DIY projects, electronics, and custom lighting setups. Featuring a common anode design, it allows for easier control and compatibility with microcontrollers and circuits requiring distinct control of each color channel. Whether you're desig...
In stock
-
LED 5mm RGB clear common cathode
This 5mm RGB LED with a clear lens is perfect for creating vibrant, multi-colored lighting effects in various DIY projects, electronics, and custom lighting setups. Featuring a common cathode design, it allows for easier control and compatibility with microcontrollers and circuits requiring distinct control of each color channel. Whether you're des...
In stock
-
LED 5mm RGB/multicolor clear color changing fast
5mm RGB LED that automatically changes color (about 7 colors).
This fast version first fades between the 7 colors (about 0.5s per color) and then flashes between the 7 colors (about 0.5s per color) and then starts over again.
Voltage: 3V DC. In stock -
LED 5mm RGB/multicolor clear color changing slow
5mm RGB LED that automatically changes color (about 7 colors).
This slow version fades between the 7 colors (about 2s per color) and then starts over.
Voltage: 3V DC. In stock -
LED 5mm Red
Standard red 5mm LED, suitable for most projects.
Don't forget to order a matching resistor.
Calculate here how much resistance you need:
http://ledcalc.com/ In stock -
LED 5mm Red Clear
Red 5mm LED with clear lens.
In stock
-
LED 5mm Red Clear Pre-wired for 5V-12V
Red 5mm LED with clear lens and pre-wired with built-in resistor for use on 5V-12V.
Cable length: ~20cm In stock -
LED 5mm Red Flat Top
Red LED with a diameter of 5mm and a flat head (flat top).
These LEDs can be mounted flush with a surface, creating a sleek design.
Voltage: 2.3V
Current: 20mA
Brightness: 500~1500 mcd
Grid spacing: 2.54mm
-
LED 5mm Red Matte pre-wired for 5V-9V
Red 5mm LED with frosted lens and pre-wired with built-in resistor for use on 5V-9V.
Cable length: ~20cm In stock -
LED 5mm Red/Green Two-tone White diffuse
Two-color LED that can light up green and red.
With common cathode.
Housing: white diffuse.
Color material:
Red: GaAsP/GaP
Green: GaP
Wavelength:
Red: 625nm
Green: 565nm
Light intensity (If = 20mA):
Red: 20-90mcd
Green: 20-70mcd
Viewing angle: 60° In stock -
LED 5mm UV/Ultraviolet clear
Ultraviolet 5mm LED with clear lens.
In stock
-
LED 5mm White Clear pre-wired for 5V-12V
White 5mm LED with clear lens and pre-wired with built-in resistor for use on 5V-12V.
Cable length: ~20cm In stock -
LED 5mm White Cold Clear
Cold white 5mm LED with clear lens.
In stock
-
LED 5mm White Matte/diffuse
To connect this LED to 5 volts you need a 100 Ohm resistor (see additional articles).
In stock
-
LED 5mm White Warm White Clear
Warm white 5mm LED with clear lens.
In stock
-
LED 5mm Yellow
Standard yellow 5mm LED, suitable for most projects.
Don't forget to order a matching resistor.
Calculate here how much resistance you need:
http://ledcalc.com/ In stock -
LED 5mm Yellow Flat Top
Yellow LED with a diameter of 5mm and a flat top.
These LEDs can be mounted flush with a surface, creating a sleek design.
Voltage: 2.3V
Current: 20mA
Brightness: 500~1500 mcd
Grid spacing: 2.54mm
In stock -
LED 5mm Yellow Matte pre-wired for 5V-9V
Yellow 5mm LED with frosted lens and pre-wired with built-in resistor for use on 5V-9V.
Cable length: ~20cm In stock -
LED 5mm blue clear
Blue 5mm LED with clear lens.
In stock
-
LED 5mm green
Standard green 5mm LED, suitable for most projects.
Don't forget to order a matching resistor.
Calculate here how much resistance you need:
http://ledcalc.com/ In stock -
LED 5mm green 12V
Can be connected directly to 12V without resistor.
In stock
-
LED 5mm green 5V
Can be connected directly to 5V without resistor.
In stock
-
LED 5mm green clear
Green 5mm LED with clear lens.
In stock
-
LED 5mm red 12V
Can be connected directly to 12V without resistor.
In stock
-
LED 5mm yellow 12V
Can be connected directly to 12V without resistor.
In stock
-
LED 5mm yellow 5V
Can be connected directly to 5V without resistor.
In stock
-
LED 5mm yellow clear
Yellow 5mm LED with clear lens.
In stock
-
LED set 20 pieces 5mm 4 colors
Set of 20 colored 5mm LEDs:
- 5 pieces red
- 5 pieces yellow
- 5 pieces green
- 5 pieces blue
Don't forget to order matching resistors.
Calculate here which resistors you need:
http://ledcalc.com/ In stock -
LED set 300 pieces 3mm / 5mm 5 colors
Set consisting of 300 LEDs in storage box.
Contents:
- 20 pieces red 5mm (1.9v)
- 20 pieces yellow 5mm (2.0V)
- 20 pieces blue 5mm (2.8V)
- 20 pieces green 5mm (2.0V)
- 20 pieces cool white clear 5mm (2.8V)
- 40 pieces red 3mm (1.9V)
- 40 pieces yellow 3mm (2.0V)
- 40 pieces blue 3mm (2.8V)
- 40 pieces green 3mm (2.0V)
- 40 pieces cool white 3mm ... In stock
- Ordered before 16h, often sent the same day*
- Small items shipped cheaply
- Secure payment
- Customers rate us with a 9,2
Shipping costs Netherlands
>
