Display LCD ST7920- 128x64 pixels white on blue

Display LCD ST7920- 128x64 pixels white on blue

Product information:

- LCD display with a ST7920 controller.
- 128x64 pixels.
- White pixels on blue lit background.
- Can be controlled serially and parallel (8 bits), e.g. by means of SPI with an Arduino (see the image with pinouts and the table below for the Arduino).
- Suitable as a replacement for 128x64 displays on RAMPS boards.
- Works on 5V.

The fixed contrast setting is normally suitable for any use. If you want to adjust the contrast yourself, connect J1 and put an adjustable (10K) resistor between VCC and GND on pin V0.

For control with the Arduino use the u8glib library which can be downloaded here: https://bintray.com/olikraus/u8glib/Arduino
If you are using the SPI connection (as in the table) put this at the top of your sketch (below the row of other display examples):
U8GLIB_ST7920_128X64_1X u8g(10);

Visible screen dimensions: 66.5x33.2mm
Viewing angles: H:70° V:50°
Type: 12864ZW
Controller: ST7920

Connecting Arduino (Display -> Arduino):

BLK/PSB/VSS -> GND
BLA/VDD -> 5V
E -> 13 (SCK)
R/W -> 11 (MOSI)
RS -> 10 (CS)