Battery holders & cases
Battery holders for various types of batteries such as AA, AAA, CR2032, and 18650. Battery holders come in different versions, including with or without a switch and with or without a cover.
Filter 36 results
Battery Type
18650
(4)
9V / 6F22
(3)
A23 / MN21 / MS21
(1)
AA
(12)
AAA
(8)
CR1220
(2)
CR2032/LIR2032
(5)
Number of batteries
1
(12)
2
(8)
3
(6)
4
(6)
6
(3)
Cover
with lid
(13)
without lid
(22)
Switch
with switch
(11)
without switch
(24)
-
Battery connectors 9V block battery for PCB
Set of 2 connectors for placing a 9V block battery (6F22) on a printed circuit board.
In stock -
Battery holder 18650 battery (Luxury)
Hard plastic holder with connection cables (150mm) that fit batteries/rechargeable batteries of the 18650 type.
Equipped with holes in the bottom so that the holder can be screwed onto a printed circuit board.
Length: 75mm
Width: 21mm
Height: 21mm
See the documentation for more information. In stock -
Battery holder 18650 battery x 1
Battery holder with connecting cables (150mm) that accommodates a type 18650 battery.
Equipped with a hole in the bottom allowing the holder to be screwed onto a printed circuit board.
Length: 75mm
Width: 20mm
Height: 19mm -
Battery holder 18650 battery x 2
Battery holder with connection cables (150mm) that fit 2 batteries/rechargeable batteries of the type 18650.
Equipped with holes in the bottom so that the holder can be screwed onto a printed circuit board. In stock -
Battery holder 18650 battery x 3
Battery holder with connection cables (150mm) that fit 3 batteries/rechargeable batteries of the type 18650.
Equipped with holes in the bottom so that the holder can be screwed onto a printed circuit board.
Dimensions: 76mm x 62mm x 20mm In stock -
Battery holder 18650 battery x 4
Battery holder with connection cables (150mm) that fit 4 batteries/rechargeable batteries of the type 18650.
Equipped with holes in the bottom so that the holder can be screwed onto a printed circuit board.
Dimensions: 76mm x 81mm x 20mm In stock -
Battery holder A23 / MN21 / MS21 battery
This battery holder holds one A23 / MN21 / MS21 battery.
With connection wire of approximately 15 cm.
In stock -
Battery holder AA Penlite x 2 (3V)
This battery holder takes 2 AA penlite batteries.
With connection wire.
In stock -
Battery holder AA Penlite x 2 (3V) small/compact
This battery holder takes 2 AA penlite batteries.
With connection wire.
In stock -
Battery holder AA Penlite x 2 (3V) with lid
This battery holder with lid takes 2 AA penlite batteries.
With connection wire.
In stock -
Battery holder AA Penlite x 2 (3V) with switch/lid
This battery holder with lid takes 2 AA penlite batteries.
The holder also has a switch and connection wires.
In stock -
Battery holder AA Penlite x 3 (4.5V)
This battery holder takes 3 AA penlite batteries.
With connection wire.
In stock -
Battery holder AA Penlite x 3 (4.5V) with lid
This battery holder with lid takes 3 AA penlite batteries.
With connection wire.
In stock -
Battery holder AA Penlite x 4 (6V)
This battery holder takes 4 AA penlite batteries.
With connection wire.
In stock -
Battery holder AA Penlite x 4 (6V)
This battery holder with lid holds 4 AA (LR06) penlite batteries.
With connection wire, without on/off switch. In stock -
Battery holder AA Penlite x 4 (6V) with switch/USB connector
For 4 AA (LR06) batteries.
In stock
-
Battery holder AA Penlite x 4 (6V) with switch/lid
This battery holder with lid holds 4 AA (LR06) penlite batteries.
With connection wire and on/off switch. In stock -
Battery holder AA Penlite x 6 (9V)
This battery holder takes 2x3 AA penlite batteries.
With connection wire.
In stock -
Battery holder AA penlite x 6 (9V)
This battery holder holds 6 AA penlite batteries.
With connection wire and 2.1x5.5mm jack plug.
-
Battery holder AAA Penlite x 2 (3V)
This battery holder takes 2 AAA penlite batteries.
With ~15cm connection wire.
In stock -
Battery holder AAA Penlite x 2 with switch/lid (3V)
This battery holder with lid and switch takes 2 AAA penlite batteries.
With connection wire of ~15cm.
In stock -
Battery holder AAA Penlite x 3 cylinder for flashlights (4.5V)
Battery holder for 3 AAA mini penlite batteries for, among other things, flashlights.
Dimensions: ⌀21.2mm x 64.8mm In stock -
Battery holder AAA Penlite x 3 with switch/lid (4.5V)
This battery holder with lid holds 3 AAA batteries.
With connection wire and on/off switch. In stock -
Battery holder AAA Penlite x 3 with switch/lid - JST conn.
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connec...
Adafruit Part number: 727
In stock
-
Battery holder AAA Penlite x 4 with switch/lid (6V)
This battery holder with lid holds 4 AAA batteries.
With connection wire and on/off switch. In stock -
Battery holder AAA Penlite x 6 (9V)
This battery holder takes 6 AAA batteries.
With connection wire. In stock -
Battery holder for 9V block battery (6LR61/6LF22)
This battery holder takes one 9V block battery (6LR61/6LF22).
With connection wire of approx. 14 cm. In stock -
Battery holder for 9V block battery with switch/lid
This battery holder takes one 9V block battery (6LR61/6LF22).
With connection wire of approx. 14 cm. In stock -
Battery holder for button cells CR1220 12mm on breakout board
Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar .
Comes with one fully assembled and tested coin cell battery holder and a small stick of 0.1... Adafruit Part number: 1868 In stock -
Battery holder for button cells CR1220 12mm on breakout board + switch
Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real -time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is alw...
Adafruit Part number: 1867
In stock
-
Battery holder for button cells CR2032/LIR2032 double (6V)
Holder for 2 CR2032/LIR20232 button cell batteries with on/off switch and cable.
Contrary to the photo, there is no connector on the cable. Adafruit Part number: 783 In stock -
Battery holder for button cells CR2032/LIR2032 horizontal
Horizontal battery holder for CR2032/LIR2032 button cells for mounting on PCB or with wires to be soldered on.
In stock
-
Battery holder for button cells CR2032/LIR2032 single
Holder for 1 CR2032/LIR2032 button cell battery with on/off switch and cable.
In stock
-
Battery holder for button cells CR2032/LIR2032 upright
Standing battery holder for CR2032/LIR2032 button cells for mounting on PCB or with wires to be soldered on.
In stock
-
LilyPad Power Booster 5V for AAA battery
This small but powerful power module is specifically designed for portable LilyPad projects. Simply insert a AAA battery, flip the switch, and you'll get a stable 5V output—ideal for powering LilyPad circuits up to 200mA. The module is short-circuit protected and remarkably compact, allowing it to be discreetly incorporated into clothing or fabri...
In stock
-
LilyPad battery holder for CR2032 battery
Holder for CR2032 batteries for use with LilyPad components.
In stock
Shipping costs Netherlands
>
