Plugs & chassis parts
Connectors and chassis components to supply your devices and circuits with power.
See also: Power cables & Mains cables-
Battery connector 9V block battery
Hard plastic connector for 9V block (6LR61/6LF22) batteries with cable (15cm).
In stock
-
Battery connectors 9V block battery for PCB
Set of 2 connectors for placing a 9V block battery (6F22) on a printed circuit board.
In stock -
Chassis part 2.1x5.5mm power plug jack plug
Chassis part for supplying devices with power through a 2.1x5.5mm jack plug.
Color: black In stock -
Chassis part 2.1x5.5mm power plug jack plug breadboard friendly
Power plug jack plug for mounting on a printed circuit board. Also suitable for (temporary) mounting on a breadboard by the correct position of the pins.
Adafruit Part number: 373
In stock
-
Chassis part 2.1x5.5mm power plug jack plug white
Chassis part for supplying devices with power through a 2.1x5.5mm jack plug.
Color: white
In stock -
Euro plug flat 230V / 2.5A white
For example, for replacing the plug of a table lamp.
Please note! Images may vary. In stock -
Plug C13 female 230V AC / 10A for mounting on wire
The C14 female plug (230V/10A) is a power plug for connecting devices to a standard IEC-C13 power cord, such as computers, power supplies, monitors, and measuring equipment. This plug is mounted directly onto a cable and is suitable for DIY and repair applications.
Thanks to its robust construction and reliable contact points, this connector ensur... In stock -
Plug C14 male 230V AC / 10A for mounting on wire
The C14 male plug (230V/10A) is a power plug for connecting devices to a standard IEC-C13 power cord, such as computers, power supplies, monitors, and measuring equipment. This plug is mounted directly onto a cable and is suitable for DIY and repair applications.
Thanks to its robust construction and reliable contact points, this connector ensures... In stock -
Plug housing 230V medium 74mm x 53mm x 43mm black
Housing with 230V plug with earth contact.
Dimensions: 74mm x 53mm x 43mm
Internal dimensions: 68mm x 48mm x 38mm
Color: black In stock -
Plug housing 230V small 74mm x 43mm x 38mm black
Housing with 230V plug.
Dimensions: 74mm x 43mm x 38mm
Internal dimensions: 66mm x 37mm x 30mm
Color: black -
Power Plug Jack Plug Male DC 2.1x5.5mm to 9V Battery Connector
For easily connecting a 9 volt battery to, for example, an Arduino.
Cable length: +/-15cm. In stock -
Power Plug Jack Plug Male DC 2.1x5.5mm with Cable
The power plug that fits perfectly into your Arduino!
Can also be used for other purposes such as video cameras.
Dimensions: 2.1 x 5.5mm.
When used for Arduino, the inside is the positive. It is recommended to use a power supply of 9 to 12 volts DC with a power of 0.5 - 1 A.
Cable length: ~30cm In stock -
Power T-connector Deans 65A 2pins red
Set of male and female deans connectors/plugs, for connecting RC power sources.
This is Pololu article number 925. In stock -
Power connectors MR30 male+female 15A 3pins
This MR30 connector set consists of a male and female plug and is ideal for compact, high-current connections in RC applications, drones, batteries and other electronics.
Features:
- Nominal current: 15A
- Peak current: up to 30A
- Voltage: suitable for DC applications
- Insulation material: high-quality heat-resistant PA
- Temperature range: -20�... In stock -
Power connectors XT60 male+female 65A 2pins yellow
For example, for connecting RC power sources.
In stock
-
Power cord 230V 1,5m black
Power cord/Power cable with earthed plug.
Connection: open end
Length: 1.5 meters
Wire: 2 cores, 0.75mm2
Color: black -
Power cord 230V with Euro plug - C7/C8 2m black
Power cord/power cable for 230V with flat Euro plug on one end and a C7/C8 connection on the other end.
Connection: C7/C8
Length: 2 meters
Wire: 2 cores
Color: black
Max. 2.5A / 250V In stock -
Power jack plug Female DC 2,1x5,5mm with block terminal connection
Female jack plug.
With terminal block connection so no soldering required!
Dimensions: 2.1 x 5.5mm.
When used for the Arduino, the inside is the plus. In stock -
Power jack plug Male DC 2,1x5,5mm with block terminal connection
The power plug that fits perfectly into your Arduino!
Can also be used for other purposes such as video cameras.
With terminal block connection so no soldering required!
Dimensions: 2.1 x 5.5mm.
When used for Arduino, the inside is the positive. It is recommended to use a power supply of 9 to 12 volts DC with a power of 0.5 - 1 A. In stock -
Power plug Jack Plug Male DC 2.5x5.5mm
Male power plug with an inner diameter of 2.5mm and an outer diameter of 5.5.
To solder a wire yourself.
Dimensions: 2.5 x 5.5mm.
Plug length: 9mm In stock -
Power plug Jack Plug Male DC 2.5x5.5mm Long (14mm)
Male power plug with an inner diameter of 2.5mm and an outer diameter of 5.5.
To solder a wire yourself.
Dimensions: 2.5 x 5.5mm.
Plug length: 14mm In stock -
Power plug Jack plug Female DC 2,1x5,5mm with cable
Cable with 2.1 x 5.5mm female jack plug for connecting power to a circuit.
Up to a maximum of 2A.
Dimensions: 2.1 x 5.5mm. In stock -
Power plug Jack plug Male DC 2,1x5,5mm
The power plug that fits your Arduino perfectly!
Can also be used for other purposes such as video cameras.
To solder a wire yourself.
Dimensions: 2.1 x 5.5mm.
Plug length: 9mm
When using the Arduino, the inside is positive. A power supply of 9 to 12 volts DC with a current rating of 0.5 - 1 A is recommended. In stock -
Socket C14 male snap-in
Chassis part for installation in a housing or panel. For connecting a C14 230V plug (see supplementary articles).
In stock
-
Socket C14 male with fuse
C14 plug socket with built-in fuse holder for 5x20mm fuses.
Voltage: 250V AC
Current max.: 10A, AC
Hole (LxW): 2.7cm x 3.8cm
Fuse: 5mm x 20mm (see https://www.bitsandparts.nl/Zekeringen-en-houders/c1-4-60 )
Connections: 4.8mm x 0.8mm
Distance between holes: 36mm In stock -
Terminal block with quick connector 2-fold
Up to 250V / 10A.
For wire from 0.5 to 3.5mm2.
With the quick connectors you can easily press the cable into the terminal block and you don't have to screw anything!
Version: 2-fold In stock -
Terminal block with quick connector 3-fold
Up to 250V / 10A.
For wire from 0.5 to 3.5mm2.
With the quick connectors you can easily press the cable into the terminal block and you don't have to screw anything!
Version: 3-fold In stock -
Terminal blocks 12-fold 2,5mm2 / 3A / 380V
Sturdy plastic terminal blocks for connecting electrical wires up to 2.5mm2, making them suitable for connecting lamps in the home, for example.
A strip of 12 crown stones next to each other. Easy to cut apart.
In stock
Shipping costs Netherlands
>
