Prototyping
-
Breadboard power module MB102 3,3 / 5V - USB
Handy power supply module for your MB102 breadboard. Press this module on your breadboard, connect power with a DC2.1 jack and you have all the voltages you need.
The power supply can provide 0.0, 3.3 or 5V voltage over 2 rails of your breadboard. You can set this per rail by means of a jumper.
The power supply itself also has header pins for 3.3V... In stock -
Breakout/Adapter board for ATMega328P IC
Breakout/adapter board for ATmega328P ICs, for example, to build your own Arduino.
In stock -
Fiberglass prototyping board / PCB (46x65 holes / 12x18cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With soldered holes on both sides.
Size: 12cm x 18cm x 1mm
Number of holes: 46 x 65
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Fiberglass prototyping board / PCB (64x109 holes / 18x30cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With soldered holes on both sides.
Size: 18cm x 30cm x 1.4mm
Number of holes: 64 x 109
Hole size: 1mm.
Hole spacing: 2.54mm.
In stock -
Pluggable terminal 2-pin female - Dinkle 5ESDV
In stock
-
Pluggable terminal 2-pin male - Dinkle 5EHDRC
In stock
-
Pluggable terminal 4-pin female - Dinkle 5ESDV
In stock
-
Pluggable terminal 4-pin male - Dinkle 5EHDRC
In stock
-
Prototype shield with mini bread board for Arduino
Super handy shield if you like to experiment with your Arduino!
You can easily press this shield onto your Arduino.
Then you build your circuit on the shield and if you want to use your Arduino for something else, you just remove the shield including the circuit!
The solution if you only have 1 Arduino but want to try different circuits or do not w... In stock -
Prototype shield with mini bread board for Arduino Mega 2560
Super handy shield if you like to experiment with your Arduino!
You can easily press this shield onto your Arduino.
Then you build your circuit on the shield and if you want to use your Arduino for something else, you just remove the shield including the circuit!
The solution if you only have 1 Arduino but want to try different circuits or do not w... In stock -
Prototyping board / PCB (17x14 holes / 4x4.5cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
Equipped with separate islands on 1 side of the board.
Total 202 holes.
Size: 4.5cm x 4cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm.
(Image of 23x18 hole version). -
Prototyping board / PCB (23x18 holes / 5x6cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
Equipped with separate islands on 1 side of the board.
Total 378 holes.
Size: 5cm x 6cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Prototyping board / PCB (26x18 holes / 7x5cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
Equipped with separate islands on 1 side of the board.
Size: 7cm x 5cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Prototyping board / PCB (30x25 holes / 9x7cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
Equipped with separate islands on 1 side of the board.
Size: 9cm x 7cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Prototyping board / PCB (39x19 holes / 10x5cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With islands of 3 holes on 1 side of the board.
Size: 10cm x 5cm x 1.5mm.
Hole size: 1mm.
Hole spacing: 2.54mm.
Copper thickness: 35µm.
Thickness: 1.5mm In stock -
Prototyping board / PCB (39x20 holes / 10x5cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With 39 lanes with 20 holes on 1 side of the board.
Size: 10cm x 5cm x 1.5mm.
Hole size: 1mm.
Hole spacing: 2.54mm.
Copper thickness: 35µm.
Thickness: 1.5mm In stock -
Prototyping board / PCB (39x20 holes / 10x5cm) without copper layer
In stock
-
Prototyping board / PCB (39x30 holes / 10x7.5cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With 39 lanes with 30 holes on 1 side of the board.
Size: 10cm 16cm x 1.5mm.
Hole size: 1mm.
Hole spacing: 2.54mm.
Copper thickness: 35µm.
Thickness: 1.5mm In stock -
Prototyping board / PCB (39x63 holes / 10x16cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With islands of 3 holes on 1 side of the board.
Size: 10cm 16cm x 1.5mm.
Hole size: 1mm.
Hole spacing: 2.54mm.
Copper thickness: 35µm.
Thickness: 1.5mm In stock -
Prototyping board / PCB (48x30 holes / 15x9cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
Size: 15cm x 9cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Prototyping board / PCB 6cm round
With 4 mounting holes of 4mm.
Diameter: 60mm
Pitch, 2.5mm
Thickness: 1.6mm In stock -
Prototyping board / PCB Fiberglass (14x20 holes / 4x6cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With soldered holes on both sides.
Size: 4cm x 6cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Prototyping board / PCB Fiberglass (18x24 holes / 5x7cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With soldered holes on both sides.
Size: 5cm x 7cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm.
(Photos 4cm x 6cm) In stock -
Prototyping board / PCB Fiberglass (34x52 holes / 9x15cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With soldered holes on both sides.
Size: 9cm x 15cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm.
In stock -
Prototyping board / PCB Fiberglass (6x28 holes / 2x8cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With soldered holes on both sides.
Size: 2cm x 8cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Prototyping board / PCB Fiberglass/Glass fiber (10x24 holes / 3x7cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With soldered holes on both sides.
Size: 3cm x 7cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Prototyping board / PCB Fiberglass/Glass fiber single sided (18x24 holes /
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
With soldered holes on 1 side.
Size: 5cm x 7cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm.
In stock -
Prototyping board PermaProto Pi Mini Kit - with EEPROM - Adafruit 2314
Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit with EEPROM
To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. Th... Adafruit Part number: 2314 -
Prototyping board PermaProto Pi Mini Kit - without EEPROM - Adafruit 2310
Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit.
To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are... Adafruit Part number: 2310 In stock -
Prototyping board PermaProto full-sized breadboard PCB - Adafruit 1606
PermaProto boards are designed with breadboard prototyping in mind. You can easily transfer your circuit to this more permanent board.
With 1.2mm drill holes so that even components with thicker pins fit in. The copper runs through the holes to the other side of the board (thru-plated). So no problem if you have to desolder something, the copper ju... Adafruit Part number: 1606 -
Prototyping board PermaProto half-sized breadboard PCB - Adafruit 1609
PermaProto boards are designed with breadboard prototyping in mind. You can easily transfer your circuit to this more permanent board.
With 1.2mm drill holes so that even components with thicker pins fit in. The copper runs through the holes to the other side of the board (thru-plated). So no problem if you have to desolder something, the copper ju... Adafruit Part number: 1609 -
Prototyping board PermaProto quarter-sized breadboard PCB - Adafruit 1608
PermaProto boards are designed with breadboard prototyping in mind. You can easily transfer your circuit to this more permanent board.
With 1.2mm drill holes so that even components with thicker pins fit in. The copper runs through the holes to the other side of the board (thru-plated). So no problem if you have to desolder something, the copper ju... Adafruit Part number: 1608 -
Prototyping board for Arduino Nano
This Arduino Nano prototyping board makes it easy for you to design custom circuits for your next Arduino project.
You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder.
It's got extra connections for all of the Arduin... In stock -
Prototyping board for Arduino UNO
This Arduino UNO prototyping board makes it easy to design custom circuits for your next Arduino project.
You can solder components onto the prototyping area to build your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder.
It has extra connections for all Arduino I/O pins an... -
Prototyping board for ICs (7.4x5cm)
Universal prototype PCB for making electronics projects.
Easily transfer your project from breadboard to this board!
Equipped with islands on 1 side of the board. The islands are conveniently arranged for placing ICs.
Size: 7.4cm x 5cm x 1mm
Hole size: 1mm.
Hole spacing: 2.54mm. In stock -
Screw terminal blocks 2-fold straight
These screw terminal blocks are useful for attaching thicker cables that don't fit in your breadboard to your circuit.
Of course, you can also solder these screw terminals onto your PCB.
With 2 connections.
Distance between pins: 5mm
Suitable for wire sizes: 22AWG to 14AWG In stock -
Screw terminal blocks 3-fold straight
These screw terminal blocks are useful for attaching thicker cables that don't fit in your breadboard to your circuit.
Of course, you can also solder these screw terminals onto your PCB.
With 3 connections.
Distance between pins: 5mm
Suitable for wire sizes: 22AWG to 14AWG In stock -
Screwless terminal KF141R 2-way
Terminal for screwless clamping of wire from 26AWG to
18AWG.
- 2-fold
- type: KF141R (side insertion)
- pitch (distance between pins): 2.54mm
- strip the wire to 11mm In stock -
Screwless terminal KF141R 3-way
Terminal for screwless clamping of wire from 26AWG to
18AWG.
- 3-fold
- type: KF141R (side insertion)
- pitch (distance between pins): 2.54mm
- strip the wire to 11mm In stock -
Screwless terminal KF141R 4-way
Terminal for screwless clamping of wire from 26AWG to
18AWG.
- 4-fold
- type: KF141R (side insertion)
- pitch (distance between pins): 2.54mm
- strip the wire to 11mm In stock -
Set with 400 pins breadboard and power module MB102
Set of a 400 pin breadboard and a power supply module MB102.
A great start to your electronics project!
Breadboard:
Breadboard 400 pins - universal experiment board.
Develop electronics projects without soldering!
This 400 pin breadboard will make your electronics hobby even more fun!
Dimensions: 8.2cm x 5.5cm x 1cm
Power module:
Handy power ... In stock -
Set wth 830 pins breadboard and power module MB102
Set of an 830 pin breadboard and a power supply module MB102.
A great start to your electronics project!
Breadboard:
Breadboard 830 pins - universal experiment board.
Develop electronics projects without soldering!
This 830 pin breadboard will make your electronics hobby even more fun!
Dimensions: 8.2cm x 5.5cm x 1cm
Power module:
Handy power ... In stock -
Terminal block with quick connector 2-fold
Up to 250V / 10A.
For wire from 0.5 to 3.5mm2.
With the quick connectors you can easily press the cable into the terminal block and you don't have to screw anything!
Version: 2-fold In stock -
Terminal block with quick connector 3-fold
Up to 250V / 10A.
For wire from 0.5 to 3.5mm2.
With the quick connectors you can easily press the cable into the terminal block and you don't have to screw anything!
Version: 3-fold In stock -
Terminal blocks 12-fold 2,5mm2 / 3A / 380V
Sturdy plastic terminal blocks for connecting electrical wires up to 2.5mm2, making them suitable for connecting lamps in the home, for example.
A strip of 12 crown stones next to each other. Easy to cut apart.
In stock -
Wire clamp WAGO 221 2-way
Clamp to quickly connect 2 wires together (welding clamp).
Suitable for wire from 0.2 to 4mm2 (24-12AWG).
Max. 450V/32A In stock -
Wire clamp WAGO 221 3-way
Clamp to quickly connect 3 wires together (welding clamp).
Suitable for wire from 0.2 to 4mm2 (24-12AWG).
Max. 450V/32A In stock -
Wire clamp WAGO 221 5-way
Clamp to quickly connect 5 wires together (welding clamp).
Suitable for wire from 0.2 to 4mm2 (24-12AWG).
Max. 450V/32A In stock -
Wire clamp WAGO 222 2-way
Clamp to quickly connect 2 wires together (welding clamp).
Suitable for wire from 0.08 to 2.5mm2 (28-12AWG).
Max. 400V/32A In stock -
Wire clamp WAGO 222 3-way
Clamp to quickly connect 3 wires together (welding clamp).
Suitable for wire from 0.08 to 2.5mm2 (28-12AWG).
Max. 400V/32A -
Wire clamp WAGO 222 5-way
Clamp to quickly connect 5 wires together (welding clamp).
Suitable for wire from 0.08 to 2.5mm2 (28-12AWG).
Max. 400V/32A In stock -
Wire set 10 colors 0.35mm² 22AWG multi-core BQ Cable
Wire set with 0.35mm2 (22AWG) wire in 10 different colors (5 meters per color).
The wire with an outer diameter of 1.4mm has a multi-stranded core.
Colors: red, blue, black, white, green, brown, yellow, violet,
orange, gray
Insulation: PVC In stock -
Wire set 10 colors 1x0.2mm² 24AWG multi-core
Wire set with wire in 10 different colours.
Red and black 10 meters.
Other 8 colours 5 meters.
The wire has a multi-stranded core. In stock -
Wire set 9 colors 1x0.2mm² 24AWG solid core
Wire set with wire in 9 different colours.
All colours 10 meters.
The wire has a solid core. In stock
Shipping costs Netherlands
>
