Soldering tools & accessories
In addition to a soldering iron, the following items are very useful when you're soldering. For example, a third helping hand that makes it easy to hold your soldering work in place so you don't have to hold it yourself and burn your fingers. Or a soldering iron holder that prevents the soldering iron from falling off your workbench, with all the consequences that entails.
-
Activated carbon filter for smoke extractor - 130 × 130 × 10 mm
Replacement filter with high-quality activated carbon element for effective absorption of smoke and harmful fumes during soldering and hobby work. The fine activated carbon captures fine dust, particles, and odors, allowing you to work cleaner and safer. Easy to install and ready to use.
- Dimensions: 130 × 130 × 10 mm
- High-quality activated c... In stock -
Antistatic soldering mat with grounding cord 100x70cm mm gray
This large soldering mat ensures a clean and ESD-safe workspace during soldering. Made of flexible, acid-resistant rubber with good toughness and high elasticity, it comes with an ESD grounding cord.
With a heat resistance of up to 300°C, a non-slip surface and dimensions of 100x70cm, this mat is ideal for soldering work.
High-quality material: T... In stock -
Antistatische kabel en druksluiting voor antistatische tafelmat
In stock
-
Desoldering pump
With a desoldering pump you can quickly and easily suck liquid tin away from your circuit, allowing you to remove components and wiring. A handy tool that always comes in handy when soldering circuits.
(The color of the item may vary.) In stock -
Desoldering tape 2.0mm x 1.5m (standard size)
Desoldering tape. This allows you to "suck up" liquid solder so you can desolder components from a printed circuit board.
If you're not sure what width you need, this is pretty much a standard size. (Or you could, of course, get the set of 5 sizes.)
Width: 2mm
Length: 1.5 meters
In stock -
Helping hand soldering help
The familiar helping hand helps you hold your soldering project. With magnifying glass and two crocodile clips that can be fixed in all positions.
Due to its size, this item can only be shipped in a parcel. In stock -
Helping hand soldering help/soldering iron holder with LED lighting
Luxury helping hand soldering aid with soldering iron holder including magnifying glass (2x magnification) with LED lighting.
- with 2 adjustable crocodile clips.
- with heavy cast iron base for extra stability
- with sponge for cleaning the soldering iron
- works on 3AAA batteries (not included) In stock -
Helping third hand soldering aid with 4 arms
Helping hand with 4 flexible and bendable arms.
Indispensable for all fine work that requires both hands, such as soldering.
- Robust metal anti-slip base (170mm x 190mm)
- 360° rotating clamps
- Four flexible arms
- With solder holder
- With sponge and gold shavings to clean the soldering iron during soldering
- With flux to make soldering easi... In stock -
Helping third hand soldering aid with 6 arms and LED lighting
Helping hand McPower "HM-6" with 6 arms, LED magnifying lamp, very flexible.
Indispensable for all fine work that requires both hands, such as soldering.
- Sturdy anti-slip base
- Storage space for very small parts
- 360° swivel clamps
- Six flexible arms
- LED magnifying lamp dimmable and light colour adjustable incl. USB cable (without USB cha... In stock -
Holder for soldering wires
Handy holder to hold 2 wires for soldering.
Dimensions: 5 x 7 cm. -
Lead-free soldering tip cleaner - 20ml can
This lead-free soldering tip refresher paste is designed to clean and restore oxidized soldering iron tips. When a soldering tip becomes dark and no longer wets properly, soldering quality decreases. This paste effectively removes oxidation and restores the tip to a clean, shiny, like-new condition.
By improving tin adhesion and heat transfer, thi... In stock -
Modeling tools 3D
Set of 6x2 tools for modeling / updating printed 3D models.
In stock
-
PCB holder for soldering / assembly
Printed circuit board holder for mounting and easy soldering of printed circuit boards.
Variable width for printed circuit boards from 10-220 mm, thickness up to 2.2 mm. A sturdy metal base ensures a good grip, rubber feet prevent slipping.
Rotatable > 360 degrees, and fixed in any desired position by means of screws.
Total size approx. 30x17x13... In stock -
Professional soldering iron cleaner
Specifications:
- Ø: 90 mm
- gilded curls -
Silicone Work Mat 34cm x 23cm x 4mm - Adafruit 3536
Color: Blue
This silicone mat is made of 4mm thick rubber and can take just about anything you throw at it. It's stable, strong, non-slip, non-conductive and heat-resistant surface for your workstation. We love it here at Adafruit because you can hot air boards right on top and there won't be any damage to our underlying worktable.
It's also skid... Adafruit Part number: 3536 -
Silicone work mat 34cm x 23cm x 5mm blue
This heat-insulating silicone work mat/soldering mat protects your desk or work table against heat from a heatgun or soldering iron (up to 500°C).
The handy compartments also make it easy to sort loose screws and parts and prevent them from getting lost.
With 20cm ruler.
Dimensions:
34cm x 23cm x 5mm
In stock -
Silicone work mat 35cm x 25cm x 5mm magnetic blue
This heat-insulating silicone work mat/soldering mat protects your desk or work table from the heat of a heatgun or soldering iron (up to 500°C).
The handy compartments also make it easy to sort loose screws and parts and prevent them from getting lost.
With a handy magnetic compartment to keep your screws from rolling away.
Dimensions:
35cm x 2... In stock -
Silicone work mat 55cm x 35cm x 5mm magnetic blue
This heat-insulating silicone work mat/soldering mat protects your desk or work table from the heat of a heatgun or soldering iron (up to 500°C).
The handy compartments also make it easy to sort loose screws and parts and prevent them from getting lost.
With handy magnetic compartments so that your screws don't roll away.
Dimensions:
55cm x 35cm... In stock -
Smoke extractor with arm
With this fume extractor with a handy arm, you can finally enjoy an odor-free and fume-free environment while soldering. The fume extractor is specially designed to effectively remove pungent odors and harmful fumes, allowing you to work in a healthy and comfortable environment.
The fume extractor is equipped with a quiet fan that ensures a peacef... In stock -
Solder vapour filter system
This fume extractor sucks the fumes released during soldering through an activated carbon filter, thus purifying the air so that you do not inhale harmful substances.
With 2 extra active carbon filters.
Dimensions: 162x260x255mm
Filter size: 125 x 130 x 10 mm
Air flow rate: 60 m³/h
Power: 23W In stock -
Soldering iron cleaner professional small
Specifications:
- Ø: 75 mm
- gilded curls In stock -
Soldering iron stand
Stand/holder for placing the soldering iron during soldering. With 'compartment' for placing a soldering sponge to clean the soldering iron.
In stock -
Soldering iron stand with solder holder and sponge
This practical and sturdy soldering iron stand is indispensable for all soldering tasks. Equipped with a solder roll holder, a cleaning sponge, and a convenient carrying handle, it offers everything you need to work safely and efficiently.
The non-slip base ensures stability, while the robust construction guarantees a long service life. Suitable fo... In stock -
Soldering iron stand with soldering iron cleaner (gold shavings)
Handy holder for your soldering iron with built-in holder for gold shavings (included) to easily remove excess or contaminated solder from your soldering iron during soldering.
In stock -
Soldering practice set SMD
Set to practice soldering SMD components.
The set consists of:
1x PCB / printed circuit board
10x 1206 resistor
20x 0805 resistor
10x 0603 resistor
20x 0805 capacitor
8x 1206 diode
8x SOT23 triode
1x SO16 IC
No working circuit is built, this set is purely for practice. In stock -
Soldering practice set SMD hourglass
Set to practice soldering components.
This set has 1 SMD IC, the rest are THT components (including 57 LEDs).
With connection diagram.
Works on 4.5v.
Attention! Check the colors of the LEDs before soldering.
In stock -
Soldering sponge
Replacement soldering sponge for Weller and ERSA soldering stations.
With one open side and one closed side.
Dimensions: 69x54x14mm In stock -
Soldering sponge thin 57x38x2mm
Soldering sponge for cleaning the soldering iron during soldering. This removes old solder and makes soldering easier.
In stock -
Spare gold curls for soldering iron cleaner professional
Is your soldering iron cleaner full of solder and gunk? Simply replace the gold curls in the holder and clean your soldering iron like a pro again!
In stock
-
Tweezer pointed 120mm anti-static ESD safe - Adafruit 422
When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to pick up any size component. This particular model is 120mm long with a 9mm / 0.35" gap at the ti...
Adafruit Part number: 422
In stock
-
Tweezer set anti-static ESD safe 6-piece
Set of anti-static ESD safe tweezers for use with sensitive components.
Set containing the following 6 types of tweezers; ESD10, ESD11, ESD12, ESD13, ESD14, ESD15.
The tweezers are also anti-magnetic.
In stock -
Vacuum pick-up tool
Vacuum pick-up tool for easy picking of small ICs and SMD components weighing up to 40 grams.
Aluminum handle, length 125 mm, diameter 12 mm, curved suction nozzle and 3 separate suction cups 7-10 mm. In stock
Shipping costs Netherlands
>
