Solenoid actuators / Electro magnets / Valves
-
Air valve miniature 3VDC ⋄3mm
Small air valve with 3mm air hose connection.
The valve is normally open but closes when a voltage of 3VDC is applied.
Dimensions:
12.2mm x 10.2mm x 21.2mm (25.7mm incl. connection)
In stock -
Electromagnet / Solenoid actuator - holding magnet 12V - 2.5kg
When activated, the magnet attracts and holds a metal magnetic surface up to 2.5kg.
Voltage: 12VDC
Current: 0.25A
Pulling force: 25N
Thread: M3 In stock -
Electromagnet / Solenoid actuator - holding magnet 12V - 25kg
When activated, the magnet attracts a metal magnetic surface and holds it up to 25kg.
Dimensions: ⋄ 32mm x 25mm
Contact area: 16mm
Voltage: 12VDC
Current: 0.3A / 3.5W
Pulling force: 25kg
Thread: M5x12 In stock -
Electromagnet / Solenoid actuator - pulling 12V
When the electromagnet is energized, the pin is pulled in. Otherwise, the pin can move freely.
Voltage: 12VDC
Tensile force: 5N
Frame dimensions: 3x1.3x1.5cm
Stroke: 10mm In stock -
Electromagnetic Lock 12V - Adafruit 1512
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end.
This solenoid in particular is nice and strong, and has a slug with a slanted cut and a g... Adafruit Part number: 1512 In stock -
Electromagnetic lock 12V small
Power consumption: +/-350mA
Supply voltage: 12VDC
Dimensions: 27mm x 29mm x 18mm
Cable length: +/-13cm In stock -
Electromagnetic lock 12V small - Lock plate
Lock plate for electromagnetic lock 12V small.
Dimensions: see image In stock -
Water valve four-way 12VDC
Water valves with 1 inlet and 4 outlets. Each outlet valve can be opened and closed separately with its own wire pair.
Input and output diameter: 8mm
Voltage: 12VDC
Current: 0.2A
Dimensions: 80mm x 48mm In stock -
Water valve with 1/2 inch screw connection 12VDC
Normally the valve is closed and the water cannot pass through. When energized the valve opens.
Attention! The water can only flow in one direction.
Voltage: 12VDC
Current: 400mA
Working pressure: 0.02 ~ 0.8MPa
Maximum water pressure: 2MPa In stock -
Water valve with 3/4 inch screw connection 12VDC
Normally, the valve is closed, preventing water from passing through. When energized, the valve opens.
With G3/4 connection (Gardena).
Voltage: 12VDC
Current: ~500mA
Working pressure: 0.02 ~ 0.8MPa
Maximum water pressure: 2MPa In stock
Shipping costs Netherlands
>
