HAT's, Expansion boards & Sensors
-
Audio amplifier 3W Class D I2S Breakout - MAX98357A - Adafruit 3006
Listen to this good news - we now have an all in one digital audio amp breakout board that works incredibly well with the Raspberry Pi! If you're looking for an easy and low cost way to get you digital sound files bumpin' then the MAX08357 I2S Amp Breakout is for you. It takes standard I2S digital audio input and, not only decodes it into analog, b...
Adafruit Part number: 3006
-
Expansion / GPIO board Cobbler plus Raspberry Pi A+/B+ Pi 2 - Adafruit 2029
The Raspberry Pi B has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B 's 40 pins.
That's why we now carry the ... Adafruit Part number: 2029 In stock -
Expansion / GPIO board Raspberry Pi 2/3 - cascading 40 pins
Expansion board for Raspberry Pi 2/3, all contacts are equipped with a quick contact. Simply press the contact and insert the wire. After releasing, the wire remains attached and can then be released just as easily.
With 2 40-pin GPIO connectors for daisy chaining to other boards.
In the middle there are additional pins with power and ground. In stock -
GPIO flat cable 26 pins for Raspberry Pi - 19cm
26 Pin flat cable / ribbon cable for connecting the GPIO connector of a Raspberry Pi.
Length /- 19cm. In stock -
GPIO flat cable 40 pins for Raspberry Pi - 20cm
40 Pin flat cable / ribbon cable for connecting the GPIO connector of a Raspberry Pi.
Length /- 20cm. In stock -
Raspberry Pi DIY Protyping Hat
HAT for the Raspberry Pi 2 and 3, among others, for making your own prototypes and circuits.
With 40 pin box header, screws, spacers and nuts. In stock -
Raspberry Pi HAT - PWM / Servo 16-Channel - Mini Kit - Adafruit 2327
The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. I...
Adafruit Part number: 2327
In stock
-
Raspberry Pi HAT - Sense HAT
The Sense HAT is an expansion board for Raspberry Pi, specially made for the Astro Pi mission – it was launched to the International Space Station in December 2015.
The Sense HAT features an 8×8 RGB LED matrix, a five-button joystick and includes the following sensors:
- Gyroscope
- Accelerometer
- Magnetometer
- Temperature
- Barometric press... In stock -
Raspberry Pi M.2 HAT+ SC1166
The SC1166 is a Raspberry Pi M.2 HAT+ board that enables you to connect M.2 peripherals such as NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface, supporting fast (up to 500MB/s) data transfer to and from NVMe drives and other PCIe accessories.
Raspberry Pi 5’s single-lane PCI Express 2.0 interface is exposed on a 16-pin,... In stock -
Real Time Clock DS3231 I2C RTC for Raspberry Pi
With this real time clock your Raspberry Pi always has the correct time, even if the power fails thanks to the battery.
In stock
-
Temperature sensor I2C LM75A for Raspberry Pi
LM75A Temperature sensor (-55°C - 125°C) with I2C/SMBus serial port interface suitable for the Raspberry Pi.
Accuracy: up to 0.125°C
Power supply: 2.8V - 5.5V
Easy to connect to the GPIO pins of the Raspberry Pi.
Learn more about connecting I2C devices. In stock
Shipping costs Netherlands
>
