Chargers
Chargers for various types of batteries. Not only complete chargers but also boards to create your own charger for integration into an electronics project.
-
Battery charger ARC2009 for Penlites AA and AAA
Battery charger for 4 AA and AAA penlites.
Suitable for Ni-MH and Ni-Cd batteries. In stock -
Charger MicroLipo USB - Adafruit 1304
Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red...
Adafruit Part number: 1304
In stock
-
Charger backpack for Pro Trinket LiIon/LiPoly Add-On - Adafruit 2124
Backpack add-on for connecting LiIon/LiPoly batteries to the Adafruit Pro Trinkets.
Attention! Delivered without batteries.
If you have a Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2 or 3 boards together to make a charging system, this littl... Adafruit Part number: 2124 In stock -
Charger board for 18650 Li-Ion batteries 3S 12V/25A
Size: 56 x 45 x 3mm
Continuous working current: 25A or less
Charge current: 10A or less
Balanced charging: Yes
Short circuit protection: yes
For assembly: Nominal 3.7V batteries / three strings
Applicable chips: ternary, cobalt acid, lithium manganese oxide
Function: overshoot, over discharge short circuit protection
Features:
- Overcharge protect... In stock -
Charger for 18650 Li-Ion batteries 3A XTAR-SC2
This charger can charge 2 batteries/accumulators of the types listed below.
The charger connects to a USB port or USB power supply using the included cable. Charging with a QC3.0 USB power supply allows charging at up to 3A.
LEDs indicate the status of the batteries.
Suitable for battery types:
18650 / 18700 / 20700 / 21700 / 22650 / 25500 / 26650... In stock -
Charger for LIR2032 coin cells - USB-C
Charger for LIR2032/LIR2025 Li-ion coin cell batteries. This charger connects to a computer/laptop/phone charger with a USB-C cable.
In stock -
Charger for LiIon/LiPoly batteries MicroUSB - Adafruit 1904
Oh so handy, this little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MicroUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, ...
Adafruit Part number: 1904
In stock
-
Charger for LiIon/LiPoly batteries MicroUSB TP4056
Small charger to charge lithium batteries from a USB connection. A red LED indicates that the battery is charging. The blue LED indicates that the battery is full.
A battery is best charged at 37% of its capacity. A 1000mAh battery is best charged at 400mA.
By default the charging current is set to 1000mA. This can be changed by changing a resisto... -
Charger for LiIon/LiPoly batteries MicroUSB TP4056 1A
Small charger to charge lithium batteries from a MicroUSB connection.
With battery protection.
Can be powered by USB or a 5V power supply.
For 3.6V-3.7V batteries such as the 18650.
Cut-off voltage: 4.2V ± 1%
Maximum charging current: 1000mA
Battery over-discharge protection voltage: 2.5V
Battery overcurrent protection current: 3A
Dimensions: ... In stock -
Charger for LiIon/LiPoly batteries Solar/USB/DC v2 - Adafruit 390
Make your projects green this summer with our specialized USB/Solar Lithium Ion Polymer Battery Charger! This charger has a very unique design, perfect for outdoor projects or DIY iPod chargers. We spent over a year testing and tinkering with this charger to create a plug and play solution for charging batteries with the sun and we are very pleased...
Adafruit Part number: 390
In stock
-
Extension cable for LiPo chargers - banana -> multi
Extension cable for (LiPo) battery chargers with a banana plug connection.
From banana to:
- TRX male
- Tamiya male
- EC3 male
- JST male
- Futaba male
- T-Dean male
- XT60 female
- free cable In stock -
PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+ - Adafruit 1903
PowerBoost is the perfect power supply for your portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. Like our popular 5V 1A USB wall adapter, we tweaked the output to be 5.2V instead of a straight-up 5.0V so that there's a little bit of 'h...
Adafruit Part number: 1903
In stock
-
PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
Adafruit 1944.
PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running... Adafruit Part number: 1944 -
Wireless Charger & Receiver
The Wireless Charger& Receiver adopts two copper wire coil superposition to active the wireless charging, it can be used in electronic equipments in common use for close wireless charging or power supply. This product consisted of a transmitter and receiver, could serve as a replacement for the Wireless Power Supply with stable 5V output voltage an...
In stock
-
Wireless charger/receiver set 5V / 2A
This wireless charging set consists of a transmitter (charger) and receiver which can be used to wirelessly charge electronics close by (1-20mm).
Easy to use in a circuit due to its small size.
Specifications:
- Input Voltage: 5~12VDC
- Output Voltage: 5VDC
- Output Current(maximum): 2000mA
- Transmitter Coil Inductance: 30uH
- Transmit-receive d... In stock
Shipping costs Netherlands
>
