• Voor 16u besteld, morgen in huis*
  • Kleine artikelen voordelig verzonden
  • Veilig betalen
  • Klanten geven ons een 9,1
  • Display Touchscreen 3,5inch TFT 320x480 m. SD-cardreader - Adafruit 2050

    Display Touchscreen 3,5inch TFT 320x480 m. SD-cardreader - Adafruit 2050
    Prijs:
    49,95 
    incl. BTW, excl. verzending
    Aantal:
    Artikelnummer:
    Adafruit 2050
    Voorraad: In stock In voorraad
  • Snel en voordelig verzonden
  • Verzendkosten voor pakket-artikelen: 5,95 €.
    Boven 80,00 € gratis.
  • Veilig betalen
  • Klanten geven Bits & Parts een 9,1/10 Link naar Kiyoh
  • Display Touchscreen 3,5inch TFT 320x480 m. SD-cardreader - Adafruit 2050

    Productinformatie:

    Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

    This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit or SPI. For 8-bit mode, you'll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analog) .

    Specificaties:
    - 3.5" diagonal LCD TFT display
    - 320x480 resolution, 18-bit (262,000) color capable - our code uses only 16-bits since its faster.
    - HXD8357D (datasheet) controller with built in video RAM buffer
    - 8 bit digital interface, plus 4 or 5 control lines (12 pins minimum) or SPI mode with 4 or 5 SPI data/control lines (4 pins minimum) - not including the touch screen.
    - 5V compatible! Use with 3.3V or 5V logic such as an Arduino
    - Onboard 3.3V @ 150mA LDO regulator
    - 6 white LED backlight with DC/DC constant-current boost. You can PWM dim the backlight
    - 1x20 headers for easy breadboarding
    - 4-wire resistive touchscreen

    Afmetingen:
    - Scherm: 56mm x 85mm x 4mm
    - PCB: 56mm x 97mm x 2mm
    - Gewicht: 52g


    Klik om de website van dit product te openen.Klik om de website van dit product te openen.