Motors, drivers and drive
Everything needed to make a 3D printer move, from the stepper motor that moves the print head back and forth to the leadscrews over which the print bed moves. For driving the stepper motor on the 3D printer, we offer various driver stepsticks that plug into the printer's mainboard.
Are the stepper motors causing too much vibration? Take a look at our shock absorbers!
-
Cable for stepper motor JST - Dupont 100cm
Cable for connecting a stepper motor. With a 6-pin JST PH connector on 1 side and a 4-pin Dupont connector on the other side (4 wires are connected).
Length: 100cm In stock -
Cable for stepper motor JST PH - JST PH 100cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 100cm In stock -
Cable for stepper motor JST PH - JST PH 150cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 150cm In stock -
Cable for stepper motor JST PH - JST PH 50cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 50cm In stock -
Cable for stepper motor JST PH - JST PH 80cm
Cable for connecting a stepper motor. With a 4-pin and a 6-pin JST PH connector (4 wires are connected).
Length: 80cm In stock -
Cable for stepper motor JST PH - open 80cm
Cable for connecting stepper motors of 3D printers.
4 Connected wires in a 6-pin plug.
Contrary to the image, the white vein can also be black.
Length: 80cm In stock -
Connector JST PH 6 pins
Connector for connecting 2 JST PH 6 pin connectors.
For example, for extending stepper motor cables.
Type: B6B-PH-TW-S (LF)(SN In stock -
Leadscrew / Spindle TR8x8 8mm 30cm
8mm Trapezium spindle, 8mm movement/revolution.
Mainly used on the Z axis of 3D printers.
Supplied without nut, see additional articles.
Diameter: 8mm
Length: 30cm
Lead: 8mm/rev.
Pitch: 2mm In stock -
Leadscrew / Spindle TR8x8 8mm 35cm
8mm Trapezium spindle, 8mm movement/revolution.
Mainly used on the Z axis of 3D printers.
Supplied without nut, see additional articles.
Diameter: 8mm
Length: 35cm
Lead: 8mm/rev.
Pitch: 2mm In stock -
Leadscrew / Spindle TR8x8 8mm 38cm
8mm Trapezium spindle, 8mm movement/revolution.
Mainly used on the Z axis of 3D printers.
Supplied without nut, see additional articles.
Diameter: 8mm
Length: 38cm
Lead: 8mm/rev.
Pitch: 2mm In stock -
Leadscrew / Spindle TR8x8 8mm 40cm
8mm Trapezium spindle, 8mm movement/revolution.
Mainly used on the Z axis of 3D printers.
Supplied without nut, see additional articles.
Diameter: 8mm
Length: 40cm
Lead: 8mm/rev.
Pitch: 2mm
In stock -
Leadscrew / Spindle TR8x8 8mm 45cm
8mm Trapezium spindle, 8mm movement/revolution.
Mainly used on the Z axis of 3D printers.
Supplied without nut, see additional articles.
Diameter: 8mm
Length: 45cm
Lead: 8mm/rev.
Pitch: 2mm In stock -
Leadscrew / Spindle TR8x8 8mm 50cm
8mm Trapezium spindle, 8mm movement/revolution.
Mainly used on the Z axis of 3D printers.
Supplied without nut, see additional articles.
Diameter: 8mm
Length: 50cm
Lead: 8mm/rev.
Pitch: 2mm In stock -
Leadscrew / Spindle nut TR8x8
Trapezoid nut for trapezoid spindles. 8mm Displacement per revolution.
Diameter: 8mm
Lead: 8mm/rev.
Pitch: 2mm
Mounting hole diameter: 3.5mm In stock -
Leadscrew / Spindle nut anti-backlash TR8x2
Trapezoid nut with anti-backlash for use on a TR8x2 trapezoid spindle.
Diameter: 8mm
Lead: 2mm/rev.
Pitch: 2mm
Mounting hole diameter: 3.5mm In stock -
Leadscrew / Spindle nut anti-backlash TR8x4
Trapezoid nut with anti-backlash for use on a TR8x4 trapezoid spindle.
Diameter: 8mm
Lead: 4mm/rev.
Pitch: 2mm
Mounting hole diameter: 3.5mm In stock -
Leadscrew / Spindle nut anti-backlash TR8x8
Trapezoid nut with anti-backlash for use on a TR8x8 trapezoid spindle.
Diameter: 8mm
Lead: 8mm/rev.
Pitch: 2mm
Mounting hole diameter: 3.5mm In stock -
Leadscrew T8 top mount/bracket for Ender 3 / CR10
Aluminum top mount/bracket for attaching the leadscrew to an Ender-3 / Ender-3S / CR10 / CR10S 3D printer.
With ball bearing and mounting screws.
-
Leadscrew nut block plastic TR8 8mm lead
Plastic lead screw nut block TR8 8mm lead for 3D printers.
Converts the rotary motion of the lead screw into a linear motion, allowing precise positioning of the print head or build platform.
Lead: 8mm/rev. In stock -
Mounting bracket for NEMA17 stepper motors, 3mm metal 5x5x5cm
Motor bracket suitable for mounting 42mm stepper motors such as the NEMA17 stepper motors.
Material: metal 3mm
Colour black
In stock -
Shaft support SK10 for 3D printers 10mm
SK10 Axle mounting for an axle with a diameter of 10mm.
Diameter: 10mm
Height: 33mm
Width: 42mm
Thickness: 14mm
In stock -
Shaft support SK16 for 3D printers 16mm
SK16 Axle mounting for an axle with a diameter of 16mm.
Diameter: 16mm
Height: 44mm
Width: 48mm
Thickness: 16mm
In stock -
Shaft support SK8 for 3D printers 8mm
SK8 Axle mounting for an axle with a diameter of 8mm.
Diameter: 8mm
Height: 33mm
Width: 43mm
Thickness: 14mm
In stock -
Shock absorber cork for NEMA17 stepper motors
Damper for NEMA17 stepper motors. The layer of cork dampens vibrations, making the 3D printer work quieter.
Distance between holes: ~31mm
Distance between holes (diagonal): 44mm
Hole diameter: ~4.5mm
Center hole diameter: ~24.5mm
Thickness: 2.7mm
In stock -
Shock absorber metal for NEMA 17 stepper motors
Damper for NEMA17 stepper motors. The layer of rubber between the metal plates provides damping of vibrations, which makes the 3D printer work more quietly.
Distance between holes: 44mm
Total thickness: 6.1mm
-
Stepper motor 42HB34F08AB/42HB34F08B
This popular 42HB34F08AB/42HB34F08B stepper motor is widely used in CNC machines and 3D printers such as the RepRap, Makerbot, Ultimaker and many others.
Dimensions: 42mm x 42mm x 34mm
In stock -
Stepper motor NEMA 17 17HS4023 i.a. Titan extruders
NEMA 17 Stepper motor of the type 17HS4023 for, among others. use on Titan and BMG extruders.
Dimensions: 42mm x 42mm x 23mm In stock -
Stepper motor NEMA 17 17HS4401
This popular 17HS4401 NEMA 17 stepper motor is widely used in CNC machines and 3D printers such as the RepRap, Makerbot, Ultimaker and many others.
Dimensions: 42mm x 42mm x 40.4mm
With JST connectors on both sides of the cable. In stock -
Stepper motor NEMA 17 17HS8401B
This popular 17HS8401B NEMA 17 stepper motor is widely used in CNC machines and 3D printers such as the RepRap, Makerbot, Ultimaker and many others.
In stock
-
Stepper motor NEMA17 Wantai 42BYGHW811
This popular Wantai 42BYGHW811 NEMA 17 stepper motor is widely used in CNC machines and 3D printers such as the RepRap, Makerbot, Ultimaker and many others.
The motor makes steps of 1.8°, which means that there are 200 steps in one complete revolution and it can be positioned very precisely.
The motor operates at a voltage of 3.1 to 12V and has ... -
Stepper motor coupling 5x8mm
This stepper motor coupling connects a 5mm shaft to an 8mm shaft. oa. for connecting stepper motors to a shaft.
Diameter: 20mm
Length: 25mm In stock -
Stepper motor coupling flexible 5x10mm
This flexible stepper motor coupling connects a 5mm shaft to a 10mm shaft. I.a. for connecting stepper motors to a shaft.
Diameter: 20mm
Length: 25mm In stock -
Stepper motor coupling flexible 5x5mm
This flexible stepper motor coupling connects a 5mm shaft to a 5mm shaft. I.a. for connecting stepper motors to a shaft.
Diameter: 20mm
Length: 25mm In stock -
Stepper motor coupling flexible 5x8mm
This flexible stepper motor coupling connects a 5mm shaft to an 8mm shaft. I.a. for connecting stepper motors to a shaft.
Diameter: 20mm
Length: 25mm In stock -
Stepper motor coupling flexible 6,35x8mm
This flexible stepper motor coupling connects a 6.35mm shaft to an 8mm shaft. I.a. for connecting stepper motors to a shaft.
Diameter: 20mm
Length: 25mm In stock -
Stepper motor coupling flexible 8x8mm
This flexible stepper motor coupling connects an 8mm shaft to an 8mm shaft. I.a. for connecting stepper motors to a shaft.
Diameter: 20mm
Length: 25mm In stock -
Stepper motor coupling semi-rigid 5x8mm
This semi-rigid stepper motor coupling connects a 5mm shaft to an 8mm shaft. I.a. for connecting stepper motors to a shaft.
Diameter: 20mm
Length: 25mm In stock -
Stepper motor coupling semi-rigid 8x8mm
This semi-rigid stepper motor coupling connects an 8mm shaft to an 8mm shaft. Oa. for connecting stepper motors to a shaft.
Diameter: 20mm
Length: 25mm In stock -
Stepper motor driver stepstick A4988 for 3D printers
A4988 Stepstick stepper motor driver for, among others. 3D printers.
Model: A4988
Input voltage: 3.3 - 5 volts
Dimensions: 20x16mm
Maximum output: 1A
Simple step and direction interface.
Five different step resolutions: full step, half step, quarter step, eighth step and sixteenth step.
With the potentiometer you can set the maximum current, al... In stock -
Stepper motor driver stepstick DRV8825 for 3D printers
DRV8825 Stepstick stepper motor driver for, among others. 3D printers.
Model: DRV8825
Input voltage: 3.3 - 5 volts
Dimensions: 20x16mm
Maximum output: 1.5A and 2.2A with sufficient cooling.
Simple step and direction interface. Breakout board for the DRV8825 microstepping bipolar stepper motor driver from TI.
Six different step resolutions: full ... In stock -
Stepper motor driver stepstick TMC2208 for 3D printers UART
TMC2208 UART Stepstick stepper motor driver for, among others. 3D printers.
Model: TMC2208 v3.0 Bigtreetech
Input voltage: 3 - 5 volts
Dimensions: 20x16mm
Maximum output: 1.2A and 2.0A with sufficient cooling.
With header pins already soldered and separate heat sink. -
TL Smoother for stepper motors of 3D printers
TL-Smoother module for stepper motors of 3D printers.
The board with 8 large flyback diodes ensures that the printer can print 'smoother'. This reduces imperfections such as 'salmon skin', 'zebra stripes' and 'moire'.
Works, among other things. in combination with DRV8825 drivers, not in combination. so-called trinamic drivers.
Supplied with a ca... In stock -
TL Smoother for stepper motors of 3D printers
TL-Smoother module for stepper motors of 3D printers.
The board with 8 large flyback diodes ensures that the printer can print 'smoother'. This reduces imperfections such as 'salmon skin', 'zebra stripes' and 'moire'.
Works, among other things. in combination with DRV8825 drivers, not in combination. so-called trinamic drivers.
Supplied with a ca... In stock -
Timing belt for 3D printers 6mm GT2 (1 meter)
GT2 timing belt of 6mm wide for 3D printers.
When ordering multiple meters, delivered in one piece.
Type: 2GT-6mm
GT2 Pitch: 2mm
Belt height: 1.38mm
Tooth height: 0.75mm
Material: rubber
Width: 6mm
Colour black
In stock -
Timing belt for 3D printers 6mm GT2 steel core (1 meter)
GT2 timing belt with a width of 6mm and extra strong steel core.
When ordering multiple meters, delivered in one piece.
Type: 2GT-6mm
GT2 Pitch: 2mm
Belt height: 1.38mm
Tooth height: 0.75mm
Material: PU rubber with steel core
Width: 6mm
Colour black
(Image is without steel core). In stock -
Torque spring for 6mm belts
Torsion spring for use with a 6mm belt.
Inner diameter: 3mm
Outer diameter: 5mm
Wire thickness: 1mm
Material: stainless steel
In stock -
V-Slot dual wheel for Creality/Openbuilds 3D printer black
V-Slot dual wheel with 625ZZ bearings for Creality and Openbuilds 3D printers.
Material: POM
Colour black
Diameter: 24mm
Inner diameter: 5mm
Width: 11mm
In stock -
V-Slot wheel for Creality/Openbuilds 3D printer black
V-Slot wheel with 625ZZ bearings for Creality and Openbuilds 3D printers.
Material: POM
Colour black
Diameter: 24mm
Inner diameter: 5mm
Width: 11mm
In stock -
V-Slot wheel for Creality/Openbuilds 3D printer transparent
V-Slot wheel with 625ZZ bearings for Creality and Openbuilds 3D printers.
Material: PC
Colour: transparent
Diameter: 24mm
Inner diameter: 5mm
Width: 11mm
In stock
Shipping costs Netherlands
>
