Voltage regulators
Voltage regulators convert a higher voltage to a lower voltage. Each voltage regulator has its own specific characteristics (e.g., min./max. input voltage, max. output power).
-
Voltage regulator 5 Volt / 2.2A - CDIL LM7805
5 Volt LM7805 voltage regulator.
The input voltage of 7 to 20 volts is reduced to 5 volts. This way, it doesn't matter what kind of power supply you have; with this voltage regulator, you always have 5V.
For example, for your Arduino sensors. For additional stabilization, it's recommended to connect two 10uF capacitors to the input and output (see ... In stock -
Voltage regulator adjustable LM317T LM317 - 1.2V - 37V/ 1.5A
Adjustable 1.5A linear LM317T LM317 voltage regulator.
Ideal for use as a current regulator for laser diodes, for example! In stock -
Voltage regulator 3.3V / 100mA Low-drop (LDO) LP2950CZ-3.3G
The Low-Drop LP2950CZ-3.3G voltage regulator is characterized by its low power loss. Where normal types require at least a voltage difference between input and output of 2 - 3 V, 0.5 to 1 V is sufficient here. In other words: your power supply can become considerably more compact.
Heat loss is greatly reduced. Lifespan is extended.
The Low-Drop vol... -
Voltage regulator 3.3V / 250mA Low-drop (LDO) HT7333 TO92
- 3.3V High efficiency Linear voltage regulator
- Maximum Input Voltage: 12V
- Output Voltage: 3.3V
- Minimum Input Voltage: 3.3V + 170mV (Drop-out)
- Very low Quiescent Current: 8uA
- TO-92 package -
Voltage regulator 3.3V / 250mA Low-drop (LDO) MCP1702-3302ET
This Low-Drop MCP1702-3302ET voltage regulator is characterized by its low power loss.
It can supply 250mA (200mA at output < 2.5V) of current while consuming only 2.0µA at rest. The supply voltage is up to 13.2V which makes it ideal for use with LiIon cells, 9V batteries and other battery powered applications.
The MCP1702 can deliver 250mA with... In stock -
Voltage regulator 3.3V / 800mA - STM LD1117V33
3.3 Volt LD1117V33 voltage regulator.
The input voltage of 4.75 to 15 Volt is reduced to 3.3 Volt. This way it doesn't matter what kind of power supply you have, with this voltage regulator you always have 3.3V. For example for your Arduino sensors.
For additional stabilization it is recommended to connect 2 capacitors of 10uF to the input and outp... In stock -
Voltage regulator 3.3V Low-drop (LDO) HT7333 SOT89 SMD
- 3.3V High efficiency Linear voltage regulator
- Maximum Input Voltage: 12V
- Output Voltage: 3.3V
- Minimum Input Voltage: 3.3V + 170mV (Drop-out)
- Very low Quiescent Current: 8uA
- SOT-89 package -
Voltage regulator 5 Volt / 1.5A - STM L7805CV
5 Volt L7805CV voltage regulator.
The input voltage of 6.5 to 37 Volt is reduced to 5 Volt. This way it doesn't matter what kind of power supply you have, with this voltage regulator you always have 5 V. For example for your Arduino sensors. For extra stabilization it is recommended to connect 2 capacitors of 10uF to the input and output (see drawi... In stock -
Voltage regulator 5V / 250mA Low-drop (LDO) MCP1702-5002ET
This Low-Drop MCP1702-5002ET voltage regulator is characterized by its low power loss.
It can supply 250mA (200mA at output < 2.5V) of current while consuming only 2.0µA at rest. The supply voltage is up to 13.2V which makes it ideal for use with LiIon cells, 9V batteries and other battery powered applications.
The MCP1702 can deliver 250mA with... In stock -
Voltage regulator 6 Volt / 1.5A - STM L7806CV
6.0 Volt L7806CV voltage regulator.
The input voltage of up to 35 Volt is reduced to 6 Volt. This way it doesn't matter what kind of power supply you have, with this voltage regulator you always have 6 V. In stock -
Voltage regulator 9.0 Volt / 2A
9.0 Volt LM7809 voltage regulator.
The input voltage of 12 to 24 Volt is reduced to 9.0 Volt. This way it doesn't matter what kind of power supply you have, with this voltage regulator you always have 9.0 V. In stock -
Voltage regulator 12.0V / 1.5A - STM L7812CV
L7812CV 12V voltage regulator.
The input voltage of 14.8 to 25 Volt is reduced to 12.0 Volt. This way it doesn't matter what kind of power supply you have, with this voltage regulator you always have 12.0 V. In stock
Shipping costs Netherlands
>
