Addressable RGB LEDs
Create vibrant light effects with our WS2812 RGB LED boards and strips. Program colorful patterns for unique visual experiences. Discover now! Many of our RGB LED strips are available for quick shipping.
Also, check out our individual RGB LEDs.
-
Connection cables for RGB LED strips - Adafruit 1004
These ingenious little clips make it easier than ever to use our analog LED strips - no need to solder! The clips snap onto the ends of the LED strip and hold securely. They're not waterproof but you could cover them in heat-shrink to make them weatherproof.
You get one piece of three different types: One is a short "joiner" - it can join two stri... Adafruit Part number: 1004 In stock -
ESP8266 WiFi module Serial WiFi ESP-01 + 16 RGB LED ring
An ESP8266 WiFi module on an interface board for connecting WS2812 LEDs.
With power connection (3.7V-5V), with support for 3.7V LiPo battery.
Includes 16 LEDs RGB ring. -
LED Board 1x WS2812B 5050 RGB LED with driver (1bit)
LED board with 1 individually controllable WS2812B RGB LED.
The LED is easily controlled from an Arduino with a single signal pin, for example with the FastLED library. (See website link.) Connect the signal pin of the Arduino to the IN pin of the board.
The boards can be interconnected by connecting the IN and OUT pins.
Supply voltage: 5V
For ... In stock -
LED Board 2x2 WS2812B 5050 RGB LED with drivers (4bits)
LED board with 4 individually controllable WS2812B RGB LEDs.
The LEDs are easily controlled from an Arduino with a single signal pin, for example with the FastLED library. (See website link.) Connect the signal pin of the Arduino to the IN pin of the board.
The boards can be interconnected by connecting the IN and OUT pins.
Supply voltage: 5V
F... In stock -
LED Board 4x4 WS2812B 5050 RGB LED with drivers (16bits)
LED board with 16 individually controllable WS2812B RGB LEDs.
The LEDs are easily controlled from an Arduino with a single signal pin, for example with the FastLED library. (See website link.) Connect the signal pin of the Arduino to the IN pin of the board.
The boards can be interconnected by connecting the IN and OUT pins.
Supply voltage: 5V
... In stock -
LED Board 5x5 WS2812B 5050 RGB LED with drivers (25bits)
LED board with 25 individually controllable WS2812B RGB LEDs.
The LEDs are easily controlled from an Arduino with a single signal pin, for example with the FastLED library. (See website link.) Connect the signal pin of the Arduino to the IN pin of the board.
The boards can be interconnected by connecting the IN and OUT pins.
Supply voltage: 5V
... In stock -
LED Board 8x32 WS2812B 5050 RGB LED with drivers (256bits)
LED board met 256 individueel aanstuurbare WS2812B RGB LEDs.
De LEDs zijn vanuit een Arduino eenvoudig aan te sturen met een enkele signaalpin bijvoorbeeld met de FastLED library. (Zie website link.) Sluit de signaalpin van de Arduino aan op de IN-pin van het board.
De boards zijn onderling door te lussen door de IN en OUT pins met elkaar door te... In stock -
LED Board 8x8 WS2812B 5050 RGB LED with drivers (64bits)
LED board with 64 individually controllable WS2812B RGB LEDs.
The LEDs are easily controlled from an Arduino with a single signal pin, for example with the FastLED library. (See website link.) Connect the signal pin of the Arduino to the IN pin of the board.
The boards can be interconnected by connecting the IN and OUT pins.
Supply voltage: 5V
... In stock -
LED Board Flexible 16x16 WS2812B 5050 RGB LED with drivers (256bits)
Flexible LED board with 16x16 WS2812B RGB LEDs. The board is slightly bendable.
All LEDs can be controlled individually (on/off, color and brightness)
over 1 data line with, for example, an ESP8266/ESP32 or Arduino.
With 2 combined data-in/out/power connections and 1 separate power connection.
Dimensions: 160mm x 160mm x 1.9mm (incl. LEDs)
Volt... -
LED Board Flexible 8x32 WS2812B 5050 RGB LED with drivers (256bits)
Flexible LED board with 8x32 WS2812B RGB LEDs. The board is slightly bendable.
All LEDs can be controlled individually (on/off, color and brightness)
over 1 data line with, for example, an ESP8266/ESP32 or Arduino.
With 2 combined data in/out/power connections and 1 separate power connection.
Dimensions: 80mm x 320mm x 1.9mm (incl. LEDs)
Voltag... In stock -
LED Board Flexible 8x8 WS2812B 5050 RGB LED with drivers (64bits)
Flexible LED board with 8x8 WS2812B RGB LEDs. The board is slightly bendable.
All LEDs can be controlled individually (on/off, color and brightness)
over 1 data line with, for example, an ESP8266/ESP32 or Arduino.
With 2 combined data in/out/power connections and 1 separate power connection.
Dimensions: 80mm x 80mm x 1.9mm (incl. LEDs)
Voltage:... In stock -
LED Board LilyPad Pixel WS2812 RGB (1bit)
This LilyPad board has an addressable WS2812 LED that you can use in combination with other LilyPad boards.
LilyPad boards are designed to be sewn onto garments with conductive thread, for example, to create an interactive project. In stock -
LED Board SparkFun Qwiic LED Stick - APA102C - COM-18354
The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Write to individual LEDs to display a binary count, or write to the entire strip for cool lighting effects. You can even add more LEDs to the end if needed. We've written an Arduino library and Python package that handle the I2...
Adafruit Part number: 474-COM-18354
-
LED NeoPixel RGB diffuse through-hole APA-106 5mm
These addressable LEDs with APA-106 chips work with the Adafruit NeoPixel library for the Arduino.
See the website link below.
(Images from 8mm version.) In stock -
LED NeoPixel RGB diffuse through-hole APA-106 8mm
These addressable LEDs with APA-106 chips work with the Adafruit NeoPixel library for the Arduino.
See the website link below. In stock -
LED NeoPixel RGB diffuse through-hole WS2811 8mm - Adafruit 1734
The Adafruit NeoPixels also come in a regular 8mm LED variant. This makes them breadboard-friendly with all the advantages that entails. Each LED looks exactly like a regular 8mm RGB LED with 4 legs, but instead of red/green/blue there is a small chip inside that drives the LED with high PWM speed with 24 bit colors.
Apply 5V to them and daisy cha... Adafruit Part number: 1734 In stock -
LED RGB Super-flux Common anode Piranha - Adafruit 1451
Diffused 5mm tri-color LEDs with separate red, green and blue LED chips inside! Ultra bright indicator or illuminator, and fun to color-swirl. 90 degree viewing angle. You can plug these into a breadboard diagonally.
These are Common-Anode type which means you connect one pin to 5V or so and then tie the other three legs to ground through a resis... Adafruit Part number: 1451 In stock -
LED Ring 8x WS2812 RGB 5050 RGB LEDs with drivers (8bits)
Ring with 8 WS2812 5050 RGB LEDs.
The LEDs can be controlled individually (on/off, color and brightness) with only 2 wires from e.g. an Arduino.
See:
https://github.com/FastLED/FastLED
https://www.tweaking4all.nl/hardware/arduino/arduino-ws2812-led/ In stock -
LED Ring 12x WS2812 RGB 5050 RGB LEDs with drivers (12bits)
Ring with 12 WS2812 5050 RGB LEDs.
The LEDs can be controlled individually (on/off, color and brightness) with only 2 wires from e.g. an Arduino.
Outer diameter: 50.0mm
Inner diameter: 35.8mm
See:
https://github.com/FastLED/FastLED and
https://www.tweaking4all.nl/hardware/arduino/arduino-ws2812-led/ In stock -
LED Ring 16x WS2812 RGB 5050 RGB LEDs with drivers (16bits)
Ring with 16 WS2812 5050 RGB LEDs.
The LEDs can be controlled individually (on/off, color and brightness) with only 2 wires from e.g. an Arduino.
See:
https://github.com/FastLED/FastLED and
https://www.tweaking4all.nl/hardware/arduino/arduino-ws2812-led/
Outer diameter: ~68mm
Inner diameter: ~55mm
In stock -
LED Ring 24x WS2812 RGB 5050 RGB LEDs with drivers (24bits)
Ring with 24 WS2812 5050 RGB LEDs.
The LEDs can be controlled individually (on/off, color and brightness) with only 2 wires from e.g. an Arduino.
See:
https://github.com/FastLED/FastLED
https://www.tweaking4all.nl/hardware/arduino/arduino-ws2812-led/ In stock -
LED Ring 3x WS2812 RGB 5050 RGB LEDs with drivers (3bits)
Ring with 3 WS2812 5050 RGB LEDs.
The LEDs can be controlled individually (on/off, color and brightness) with only 2 wires from e.g. an Arduino.
Diameter: 22.7mm
See:
https://github.com/FastLED/FastLED
For connection see:
https://www.tweaking4all.nl/hardware/arduino/arduino-ws2812-led// In stock -
LED Ring 7x WS2812 RGB 5050 RGB LEDs with drivers (7bits)
Ring with 7 WS2812 5050 RGB LEDs.
The LEDs can be controlled individually (on/off, color and brightness) with only 2 wires from e.g. an Arduino.
Diameter: 22.7mm
See:
https://github.com/FastLED/FastLED
For connection see:
https://www.tweaking4all.nl/hardware/arduino/arduino-ws2812-led// In stock -
LED Ring NeoPixel - 1/4 60x WS2812 5050 RGB LEDs with drivers - Adafruit 17
1/4 Segment of the 60x NeoPixel ring.
The biggest NeoPixel Ring yet! With four of these you can make a huge ring with 60 ultra bright smart LED NeoPixels are arranged in a circle with a 6.2" diameter. Each order comes with just the quarter ring. Four of this item are required to make a large ring. You will have to solder them together as well, so ... Adafruit Part number: 1768 In stock -
LED Ring NeoPixel - 16x WS2812 5050 RGB LEDs with drivers - Adafruit 1463
Round and round and round they go!
16 Ultra bright smart LED NeoPixels in a circle with an external diameter of 44.55mm. These rings are 'daisy chain' - connect the output pin of one to the input pin of another. You only need 1 pin of a microcontroller to as many rings as you want to control. Each LED is addressable because the driver chip is in th... Adafruit Part number: 1463 In stock -
LED Ring NeoPixel - 24x WS2812 5050 RGB LEDs with drivers - Adafruit 1586
Round and round and round they go!
24 Ultra bright smart LED NeoPixels in a circle with an external diameter of 66mm. These rings are 'daisy chain' - connect the output pin of one to the input pin of another. You only need 1 pin of a microcontroller to control this many rings to control if you want to loop through. Each LED is addressable because t... Adafruit Part number: 1586 -
LED Ring NeoPixel Jewel - 7x WS2812 5050 RGB LEDs - Adafruit 2226
Be the belle of the ball with the NeoPixel Jewel! We fit seven of our the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a chainable design to create what we think is our most elegant (and evening-wear appropriate) NeoPixel board yet.
Use only one microcontroller pin to control as many as you can chain tog... Adafruit Part number: 2226 In stock -
LED Ring Set 8/12/16/24 WS2812 5050 RGB LEDs with drivers
Set of 4 rings with respectively 8, 12, 16 and 24 WS2812 5050 RGB LEDs.
The LEDs can be controlled individually (on/off, color and brightness) with only 2 wires from e.g. an Arduino.
See:
https://github.com/FastLED/FastLED
https://www.tweaking4all.nl/hardware/arduino/arduino-ws2812-led/ In stock -
LED Ringset 60x WS2812 5050 RGB LEDs with drivers (clock)
With this 4-piece set you can make a ring with 60 WS2812 RGB LEDs.
The segments can be interconnected (soldered), allowing all 60 LEDs to be controlled individually with 1 signal pin from an Arduino/Raspberry Pi or other MCU.
For example, you can make a clock this way.
Download the Adafruit Neopixel library or FastLED library for programming examp... In stock -
LED SMD 5050 PLCC6 RGB WS2812B addressable - 5x5x1mm
WS2812B addressable SMD RGB LED.
Dimensions: 5x5x1mm
Current: 16mA per color
Voltage red: 1.8V - 2.2V
Voltage blue: 2.8V - 3.1V
Voltage green: 2.9V - 3.2V
Wavelength of red color: 620-630nm
Wavelength of blue color: 465-475nm
Wavelength of green color: 515-530nm
Brightness of red color: 550-700mcd
Brightness of blue color: 200-400mcd
Brightnes... In stock -
LED Stick NeoPixel - 8x WS2812 5050 RGB LEDs with drivers
Stick with 8 WS2812 5050 RGB LEDs.
The LEDs can be controlled individually (on/off, color and brightness) with only 2 wires from e.g. an Arduino.
See:
https://github.com/FastLED/FastLED
https://www.tweaking4all.nl/hardware/arduino/arduino-ws2812-led/
Dimensions: 57mm x 10.22mm x 3.19mm
Supply voltage: 4V - 7V In stock -
LED Stick NeoPixel - 8x WS2812 5050 RGB LEDs with drivers - Adafruit 1426
Make your own small LED strip circuit with this stick with NeoPixel LEDs. There are 8 small smart 5050 (5mm x 5mm) smart RGB LEDs on a PCB with mounting holes and a daisy chain design.
You only need 1 pin of a microcontroller to drive as many rings as you want. Each LED is addressable because the driver chip is in the LED itself. Each LED uses a c... Adafruit Part number: 1426 In stock -
LED Strip NeoPixel RGB - 60 LEDs / 1m black - 1 meter Adafruit 1461
Adafruit's 32-LEDs-per-meter RGB strips were already very popular, now there are even strips with 60 LEDs per meter!
The strips have also become narrower, 12.5mm and even 10mm if you remove the protection! To make the strips less noticeable, they are now also available with a black background.
These are not just any RGB LED strips, this one has 60... Adafruit Part number: 1461 -
LED Strip RGB WS2812 5V - IP65 - 60 LEDs/m - 5 meters black
RGB LED strip with 60 pieces WS2812 RGB LEDs per meter. In total that is 300 LEDs divided over 5 meters.
With connectors at the two ends of the strip.
The LEDs on this strip are WS2812 LEDs and are individually addressable/controllable.
The strips can be made to desired length by simply cutting them. The strips indicate where this is possible.
You ... In stock -
LED Strip RGB WS2812 5V - IP65 - 60 LEDs/m - 5 meters white
RGB LED strip with 60 pieces WS2812 RGB LEDs per meter. In total that is 300 LEDs divided over 5 meters.
With connectors at the two ends of the strip.
The LEDs on this strip are WS2812 LEDs and are individually addressable/controllable.
The strips can be made to desired length by simply cutting them. The strips indicate where this is possible.
You ... In stock -
LED Strip RGB WS2812 5V - IP67 - 60 LEDs/m - 5 meters black
RGB LED strip with 60 pieces WS2812 RGB LEDs per meter. In total that is 300 LEDs divided over 5 meters.
With connectors at the two ends of the strip.
The LEDs on this strip are WS2812 LEDs and are individually addressable/controllable.
The strips can be made to desired length by simply cutting them. The strips indicate where this is possible.
You ... In stock
Shipping costs Netherlands
>
