Arduino shields are boards that are plugged into the top of the Arduino to expand its functionality.
It is often possible to stack multiple Arduino shields on top of each other.
Bits & Parts Netherlands offers a wide range of affordable Arduino shields, and many shields also come with connection and programming examples.
-
AVRISP Shield for Arduino with buzzer
Did you know that you can burn Arduino bootloaders onto ATmega chips, making them Arduino compatible?
Previously you needed a breadboard and a lot of jumper wires for this, but with this AVR ISP shield it becomes a lot easier!
This shield is additionally equipped with a buzzer that indicates the progress of the bootloading/programming process.
Fi... In stock -
Arduino Practice and Experiment Shield
Experiment shield for the Arduino UNO or Mega.
The shield is perfect if you want to learn how an Arduino works and how to program it.
The shield contains the following modules (connected to the pins in the list):
- 2 push buttons (D2/D3)
- 2 LEDs (D12/D13)
- DHT11 humidity and temperature sensor (D4)
- potentiometer (A0)
- LDR light sensor (A1)
- ... In stock -
Arduino practice and experimenting shield with display
Experiment shield with display for the Arduino UNO or Mega.
The shield is perfect if you want to learn how an Arduino works and how to program it.
The shield contains the following modules:
- display with 74HC595 driver
- reset button
- buzzer
- 3 microswitch buttons
- 4 LEDs
- potentiometer 3296
- header pins for sensors and servos
In stock -
Audio MP3 'Music Maker' music shield with 3 Watt amplifier - Adafruit 1788
Bend all audio files to your will with the Adafruit Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg V...
Adafruit Part number: 1788
-
Bluetooth/BT BLE Bluefruit shield for Arduino - Adafruit 2746
Would you like to add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project? Heck yeah! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Bluefruit LE Shield for Arduino!
The Bluefruit LE Shield makes it easy to add Blu... Adafruit Part number: 2746 In stock -
Bluetooth/BT shield (master/slave) for Arduino
This bluetooth shield has an integrated serial bluetooth module. It can be easily used for wireless serial communication.
You can choose two pins of the Arduino (D0 to D7) which are used for the software serial port to communicate with the bluetooth shield.
Five analog IO pins are also passed through to the shield to connect other devices. The blu... In stock -
Data Logging Shield with SD card reader and RTC - Adafruit 1141
This is a handy Arduino shield: a well designed shield specifically for data logging. Not only easy to mount and customize, but it also comes with good documentation and libraries. (See website link.)
This allows you to get started quickly, saving data to files on any FAT16 or FAT32 formatted SD card, which you can use in any plotting, spreadsheet... Adafruit Part number: 1141 In stock -
Data Logging Shield withSD card reader and RTC voor Arduino UNO
The RTC Data Logger shield adds storage to your Arduino project. It supports SD, SDHC, or MicroSD TF cards and has an RTC clock on board.
In stock -
Display LCD Shield 16x2 white/blue white keypad/menu buttons
Shield for the Arduino with an LCD display (16x2 white letters on blue background) and push buttons (UP/DOWN/LEFT/RIGHT/SELECT and RESET).
Ideal for creating an application that uses a menu structure.
- Free pins: digital D0-D7 and analog A1-A5
- With adjustable contrast
- With implemented ICSP header on the shield.
- With easy to understand sketc... In stock -
ESP8266 NodeMCU Motor shield
Motor shield for an ESP8266 NodeMCU module.
In this case, the NodeMCU is pressed onto the shield.
With L293D motor driver for controlling 2 DC motors on so-called smart cars.
There are header pins for all UART/SPI and GPIO pins of the ESP8266. See the last image for all connections.
Motor voltage: 4.5VDC-36VDC.
Board voltage: 4.5V-9V
For more in... In stock -
ESP8266 WiFi Shield web server/client for Arduino UNO/MEGA
Shield with an ESP8266 ESP-13 wifi module. A built-in voltage converter ensures smooth communication between the Arduino and the ESP8266.
With the module in server mode, it can be accessed by clients on a set port and pass on the data sent by the Arduino.
With the module in client mode, it connects to a server itself and passes on the data sent by ... -
Ethernet/LAN network shield ENC28J60 for Arduino Nano
This shield for the Arduino Nano easily gives your Arduino an Ethernet connection and thus opens the way to the network/internet.
- Ethernet controller: ENC28J60.
- Connection speed: 10/100Mb
See the website link for more information. In stock -
Ethernet/LAN network shield W5100 SD-card reader for Arduino
Connect your Arduino to your local network and the internet with this shield!
Simply press the shield on, connect the RJ45 ethernet cable to your network and your Arduino can access the internet.
Very easy to use with the programming examples already included in the Arduino software!
- Works on 5 Volts (from your Arduino).
- Ethernet controller: W... In stock -
GSM/GPRS Shield Quad band SIMCOM SIM900
This GPRS shield is based on the SIM900 module from SIMCOM and is compatible with the Arduino. The shield gives you the possibility to communicate with the GSM network.
The shield allows you to use GSM, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT commands). It is also equipped with 12 GPIOs, 2 PWMs a... In stock -
Game/Joystick Shield Arduino Uno / Mega
Game shield for the Arduino Uno/Mega with joystick (X/Y and push button) and four ABCD push buttons and 2 microswitches.
With connections for an 8 pin NRF24L01 module and Nokia 5110 display.
In stock -
IO shield for Arduino Nano
This Arduino Nano IO shield is suitable for Nano's and Pro's.
This shield makes it easier to connect the pins like on the larger Arduinos.
All pins can be connected to the header pins.
Features:
- Analog/Digital inputs with VCC/GND
- The digital IO ports are prepared for the use of digital modules and servos/
- The analog IO port is prepared for ... In stock -
Motor shield TB6612 for Arduino V2.3 - Adafruit 1438
The original Adafruit motor shield is one of the most trusted shields. That's why Adafruit decided to make it even better. The shield was upgraded to make controlling DC and stepper motors even better and easier. With this shield you will be ready for your next robotics project in no time! The ability to control 4 DC motors or 2 stepper motors ...
Adafruit Part number: 1438
-
Motor/stepper shield L293D for Arduino
With this shield you can control servos, stepper motors and DC motors with your Arduino.
You can connect the following to the shield:
- 2x 5V hobby servos. This is linked to the high resolution timer of the Arduino so you have no jitter.
- Up to 4 bi-directional DC motors with 8 bit speed setting.
- Up to 2 stepper motors (unipolar or bipolar)
The... In stock -
Motor/stepper shield L298 for Arduino A000079
The original Arduino motor shield is based on the L298. This is a dual full-bridge driver designed to drive relays, solenoids, DC and stepper motors.
You can control 2 DC motors with your Arduino board. You can control the speed and direction of each motor independently. You can also measure the power consumption of each motor.
Voltage: 5 to 12 V... In stock -
Motor/stepper shield L298P for Arduino
The Arduino motor shield is based on the L298P. This is a dual full-bridge driver designed to drive relays, solenoids, DC and stepper motors.
You can control 2 DC motors with your Arduino board. You can control the speed and direction of each motor independently.
Voltage: 5 to 12 Volts
Motor controller: L298P;
For controlling 2 DC motors or 1 ste... In stock -
Prototype shield with mini bread board for Arduino
Super handy shield if you like to experiment with your Arduino!
You can easily press this shield onto your Arduino.
Then you build your circuit on the shield and if you want to use your Arduino for something else, you just remove the shield including the circuit!
The solution if you only have 1 Arduino but want to try different circuits or do not w... In stock -
Prototype shield with mini bread board for Arduino Mega 2560
Super handy shield if you like to experiment with your Arduino!
You can easily press this shield onto your Arduino.
Then you build your circuit on the shield and if you want to use your Arduino for something else, you just remove the shield including the circuit!
The solution if you only have 1 Arduino but want to try different circuits or do not w... In stock -
Relay shield for Arduino
The Relay Shield v1.3 is an Arduino-compatible smart module with four mechanical relays that provides a simple way to control high voltage. Its maximum switching power is 35VDC (70W) for each channel. It can be controlled directly by Arduino via digital I/O and an external 9V DC power supply.
The relays are on pins D0, D1, D2 and D3.
The NC1 (of ... In stock -
Screw shield
The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and a 5mm green LED.
The Screw terminal can be screwed d... In stock -
Screw shield for Arduino 2-fold
This shield makes attaching wires to the Arduino pins a lot easier thanks to the screw connections.
Because this shield consists of 2 parts, the Arduino board remains accessible.
Stacking shields is still possible with this shield. In stock -
Sensor shield v2 for Arduino Mega
Sensor shield for the Arduino Mega.
All inputs and outputs of the Arduino are passed through to sets of 3 header pins labeled Vcc (V), Ground (G) and Signal (S).
With reset button on the shield.
In stock -
Sensor shield v4 for Arduino Uno/Mega/Duemilanove
Sensor shield for the Arduino Uno, Mega and Duemilanove.
All inputs and outputs of the Arduino are passed through to sets of 3 header pins labeled Vcc (V), Ground (G) and Signal (S).
The A0 to A5 analog inputs and outputs are additionally passed through to 3-pin interlock connectors.
For I2C or UARt communication (selectable with jumpers) a separat... In stock -
Servo/PWM Shield 16 channel 12-bit - Adafruit 1411
You want to make a cool Arduino robot, maybe a hexpod walker or maybe a piece of art with lots of moving parts. Or maybe you want to control a lot of LEDs with precise PWM output. Then you find out that your Arduino doesn't have enough PWM outputs, or that they conflict with another shield! What now? You could give up OR you could get this handy PW...
Adafruit Part number: 1411
In stock
-
Terminal adapter for Nano 3.0
You can plug your Arduino Nano into this terminal adapter and have all inputs and outputs available on the screw terminals.
This allows you to easily connect all your sensors, servos, motors and other input/outputs to the Nano.
Supplied with loose screw terminals and headers so you can solder them yourself according to your wishes.
In stock -
Terminal adapter for Nano 3.0 presoldered
You can plug your Arduino Nano into this terminal adapter and have all inputs and outputs available on the screw terminals.
This allows you to easily connect all your sensors, servos, motors and other input/outputs to the Nano.
Supplied fully pre-soldered so you can get started with this adapter right away. In stock -
USB Host Shield 2.0 for Arduino
With this USB host shield you can connect USB devices to your Arduino. For example, you can connect a USB stick, an external USB hard drive or a USB Bluetooth stick.
With a bluetooth stick you can then pair with a Wiimote for example. For this, see the bluetooth examples in the library.
Under documentation you will find the library you need to use... -
ZigBee/XBee Shield V03 for Arduino
Shield for the use of ZigBee/XBee modules.
Compatible with Series 1, Series 2.5, standard and Pro versions.
All pins of the Arduino are of course implemented. With reset button and switch to switch the communication of the ZigBee module between the USB port and the microcontroller.
Supplied without ZigBee/XBee module. In stock
Shipping costs Netherlands
>
